Page 1 of 1

How to enable telnet or ADB on the Foxconn T99W175 5G WWAN

Posted: Tue Apr 18, 2023 11:39 pm
by 12:00
Hello

I would like to connect by ADB to my T99W175 x55 modem connected by PCI, but `adb devices` show nothing on the IP address of wwan0.

Should I use a specific address? I though adbd was listening on 0.0.0.0:5555

I would be interested in any solution.

Also, has anyone attempted tweaks like https://blog.cacombos.com/2020/11/12/en ... mm-device/ or https://mt-tech.fi/en/enable-all-availa ... mm-device/ to enable at least 256QAM UL?

Thanks!

Re: How to enable telnet or ADB on the Foxconn T99W175 5G WWAN

Posted: Thu Apr 27, 2023 9:43 am
by Didneywhorl
Could be wrong but I always looked for adb on serial COM ports (USB), versus TCP/IP ports. I'm super not versed in ADB stuff though, so... /2cents.