Page 1 of 1

RM-502Q-AE stuck in a loop?

Posted: Thu Apr 06, 2023 1:52 pm
by biorchang
Hi all.

Trying to setup my RM502Q-AE modem using a Rpi4b and 5G hat. SIM is known good and carrier is Verizon.

I setup a modem connection profile in GoldenOrb using APN of vzwinternet but modem will just disappear...reconnect and repeat continually.

Here is connection log:

Mon Apr 3 15:38:47 2023 : QMI Connect Starting QMI
Mon Apr 3 15:38:47 2023 : QMI Connect 1 WDA-GET-DATA-FORMAT is "raw-ip"
Mon Apr 3 15:38:48 2023 : QMI Connect 1 Device does not support 802.3 mode. Informing driver of raw-ip only for wwan0 ..
Mon Apr 3 15:38:48 2023 : QMI Connect 1 Waiting for network registration
Mon Apr 3 15:38:49 2023 : QMI Connect 1 Registration State : registered
Mon Apr 3 15:38:49 2023 : QMI Connect 1 Connect to network using vzwinternet
Mon Apr 3 15:38:49 2023 : QMI Connect 1 Connection Parameters : vzwinternet none NIL NIL
Mon Apr 3 15:38:49 2023 : QMI Connect 1 IPv4 Connection returned : "Call failed"
Mon Apr 3 15:38:49 2023 : QMI Connect 1 GET-CURRENT-SETTINGS is "Out of call"
Mon Apr 3 15:38:49 2023 : QMI Connect 1 Unable to connect IPv4
Mon Apr 3 15:38:49 2023 : QMI Connect 1 IPv6 Connection returned : "Call failed"
Mon Apr 3 15:38:49 2023 : QMI Connect 1 Unable to connect IPv6
Mon Apr 3 15:38:49 2023 : QMI Connect Starting QMI
Mon Apr 3 15:38:49 2023 : QMI Connect Stopping network wan1
Mon Apr 3 15:38:49 2023 : QMI Connect Starting QMI
Mon Apr 3 15:38:50 2023 : QMI Connect 1 WDA-GET-DATA-FORMAT is "raw-ip"
Mon Apr 3 15:38:50 2023 : QMI Connect 1 Device does not support 802.3 mode. Informing driver of raw-ip only for wwan0 ..


Any ideas?

Re: RM-502Q-AE stuck in a loop?

Posted: Fri Apr 07, 2023 11:14 am
by biorchang
Instructions in this post seemed to work for me.

viewtopic.php?f=43&p=26224#p26224