Wireless Joint

Was wondering if anyone has managed Tailscale/wireguard or any VPN be automated internally.

if your device has space you can do this and control it by making a sh file to control it or I have heard there
are some already made for ARM devices out there.
I made one for pia and found an exploit that makes pia free and able to be used on unlimited devices, I baked it into a firmware build and had it working on several of the old novatels it worked good while I used it.

Maybe I'll try playing with my spare 1100. Don't want risk my new 6110.

Do any of these Netgear hotspot routers already include Wireguard?

Successfully load ZeroTier as VPN on MR1100 and MR6500 to route traific via ZeroTier private network

@cgigate do you happen to have a write up on how?

Hogwild wrote: Mon Jan 15, 2024 3:49 pm Do any of these Netgear hotspot routers already include Wireguard?

Not sure about Netgear hostpot, but any GoldenOrb flashable router has regular VPN and Wire-Guard built in.
It's possible to add it to hotspots too, you may want to contact Rich Hathaway for that.

Thanks, I don't need it. I was just curious because of this that someone did with their mr1100:

Initial Wireguard modules in mr1100
https://github.com/sgulls/MR1100-Kernel/releases