NEXP1GO keeps connecton but no data throughput
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Mountaineer
- Posts: 2
- Joined: Mon Nov 14, 2022 5:47 pm
- Has thanked: 0
- Been thanked: 0
NEXP1GO keeps connecton but no data throughput
Howdy! NEXP1GO with Quectel RM500. All was great for a couple weeks. I received a message on device "Connected but no Internet". Status shows connected. I can change bands. With wired or wireless connection there is no RX or TX. Totally random. It happens with T-Mobile SIM and AT&T SIM. I've flashed as advised in other posts several times. Any ideas where to start looking ?
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: NEXP1GO keeps connecton but no data throughput
Which router firmware version are you using and which modem firmware version (AT+QGMR)
-
Mountaineer
- Posts: 2
- Joined: Mon Nov 14, 2022 5:47 pm
- Has thanked: 0
- Been thanked: 0
Re: NEXP1GO keeps connecton but no data throughput
Firmware version is: WiFiX-NEXP1GO-GO2022-11-18-upgrade
Modem Firmware version is: RM500QAEAAR11A02M4G_01.003.01.003
The issue is happening more often. One thing I noticed... while streaming TV, the video just stops. freezes. No buffering... video just halts.
Modem Firmware version is: RM500QAEAAR11A02M4G_01.003.01.003
The issue is happening more often. One thing I noticed... while streaming TV, the video just stops. freezes. No buffering... video just halts.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: NEXP1GO keeps connecton but no data throughput
Change to the 10-05-2022 version. I've also noticed a few odd issues with the November version. Mostly with the wifi. The 10-05 version hasn't had any complaints that I've seen or found myself. Same for the NEXS2GO.
Also, make sure you've enabled a scheduled nightly reboot, under the Services menu. It's just good practice on openWRT, imo.
Also, make sure you've enabled a scheduled nightly reboot, under the Services menu. It's just good practice on openWRT, imo.
