Wireless Joint

I am running Wifix / Goldenorb, and trying to use the Hotspot manager to connect to a wifi hotspot. The wireless network Im trying to join has strong signal and is not using a password. I can add it to the list (both the 2.4 and 5ghz) but when I try to connect to it I get the following:

Tue Dec 20 17:47:34 2022 : Enable Connect Hotspot
Tue Dec 20 17:47:38 2022 : HOTSPOT-[0.3.0] info AP Status ::: true
Tue Dec 20 17:47:38 2022 : HOTSPOT-[0.3.0] debug check ::: sta name: , status: false, count: 0
Tue Dec 20 17:47:38 2022 : HOTSPOT-[0.3.0] debug check ::: ap name: wlan0, status: true, count: 0
Tue Dec 20 17:47:38 2022 : HOTSPOT-[0.3.0] info AP true
Tue Dec 20 17:47:44 2022 : HOTSPOT-[0.3.0] debug check ::: ap name: , status: false, count: 0
Tue Dec 20 17:47:44 2022 : HOTSPOT-[0.3.0] debug main ::: ap-list: , sta-list: wwan2_wwan2 wwan5_wwan5
Tue Dec 20 17:47:47 2022 : HOTSPOT-[0.3.0] debug check ::: ap name: , status: false, count: 0
Tue Dec 20 17:47:47 2022 : HOTSPOT-[0.3.0] debug main ::: ap-list: , sta-list: wwan2_wwan2 wwan5_wwan5
Tue Dec 20 17:47:47 2022 : HOTSPOT-[0.3.0] error main ::: no usable AP/STA configuration found
Tue Dec 20 17:47:47 2022 : HOTSPOT-[0.3.0] info main ::: no wwan uplink found


I've tried numerous other hotspots and havent had any luck.

Try using a password anyway?

I've tried to connect to hotspots that required a password and some that don't and get the same results. I've even tested with my home wifi and tried to get the NEXS2GO to connect to it and it gets the same errors. I've tried removing the password on my home wifi, and even setting a password with the same results.

I've tried using both the 2.4ghz and the 5ghz radios on the NEXS2GO to connect to hotspots and get the same error messages as in my original post. I'm drawing a blank on what to try next.