I'm using the following USB to M2 adapter: https://thewirelesshaven.com/shop/mini- ... dapter-v7/
for a Telit FN990 5G modem. Unfortunately I am keep getting SIM not detected. Tried directly sending AT comands as well as using ModemManager, but the results are the same.
Also tested with 3 different SIMs but the results are the same.
Any help is highly appreciated.
Regards,
Fabrizio
SIM not detected with Telit 5G modem
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: SIM not detected with Telit 5G modem
Unfortunately I'm getting SIM failure:
AT+ICCID
+CME ERROR: SIM failure
I have tried to reverse the SIMIN polarity (AT#SIMINCFG) and after switching the SIM slot with AT#SIMDET, I'm getting something:
AT#SIMPR?
#SIMPR: 0,0,1
#SIMPR: 0,1,0
(slot #0 seems to have SIM detected), but any attempt to read any value off it, keep responding with error:
AT+CIMI
+CME ERROR: SIM not inserted
Regards,
Fab
AT+ICCID
+CME ERROR: SIM failure
I have tried to reverse the SIMIN polarity (AT#SIMINCFG) and after switching the SIM slot with AT#SIMDET, I'm getting something:
AT#SIMPR?
#SIMPR: 0,0,1
#SIMPR: 0,1,0
(slot #0 seems to have SIM detected), but any attempt to read any value off it, keep responding with error:
AT+CIMI
+CME ERROR: SIM not inserted
Regards,
Fab
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: SIM not detected with Telit 5G modem
Have you also been polling with: AT#SIMDET ?
The Telit modem stuff is not my strongest. I wish all these modem manufacturers would stop with the extremely different (read: "proprietary") methods to use the exact same things.
The Telit modem stuff is not my strongest. I wish all these modem manufacturers would stop with the extremely different (read: "proprietary") methods to use the exact same things.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: SIM not detected with Telit 5G modem
Have you tested the adapter with another modem brand/model to see if it reads the SIM?
Re: SIM not detected with Telit 5G modem
Thank you so much for trying to help... I really appreciate. I feel at least I can speak with someone who knows more than me here (Telit support is not really helping)...
So, polling with AT#SIMDET? is the only way to get the modem to at least detect a change in the SIMIN pin...
To be more precise after a reboot (with SIM inserted), I query AT#SIMDET? few times, but no changes, then I switch between slot 0 to slot 1 and back to slot 1, and only at that point it reports SIM inserted (through a SIMPR unsolicited message)....
SIMDET? reports SIMIN pin high, and even a direct query through AT#SIMPR? reports present....
... but AT#SIMSS still says "no SIM"
... and even AT+CIMI reports "ERROR: SIM not inserted"
It seems the SIM card is detected (the SIMIN polarity seems need to be HIGH instead of the default LOW)... but there are communication issues with it...
I am trying to test it with a different adapter, but the adapter "recommended" (and supported) by Tecship/Telit is out of stock... I guess I can try with an older adapter this week but I have to remove some LED around the M2 connector (in the adapter) because this modem module won't fit.
Another thing I need to try is to upgrade the firmware of the module... will keep you posted.
Thanks again for your suggestions.
So, polling with AT#SIMDET? is the only way to get the modem to at least detect a change in the SIMIN pin...
To be more precise after a reboot (with SIM inserted), I query AT#SIMDET? few times, but no changes, then I switch between slot 0 to slot 1 and back to slot 1, and only at that point it reports SIM inserted (through a SIMPR unsolicited message)....
SIMDET? reports SIMIN pin high, and even a direct query through AT#SIMPR? reports present....
... but AT#SIMSS still says "no SIM"
... and even AT+CIMI reports "ERROR: SIM not inserted"
It seems the SIM card is detected (the SIMIN polarity seems need to be HIGH instead of the default LOW)... but there are communication issues with it...
I am trying to test it with a different adapter, but the adapter "recommended" (and supported) by Tecship/Telit is out of stock... I guess I can try with an older adapter this week but I have to remove some LED around the M2 connector (in the adapter) because this modem module won't fit.
Another thing I need to try is to upgrade the firmware of the module... will keep you posted.
Thanks again for your suggestions.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: SIM not detected with Telit 5G modem
Keep us posted.
In my experience Telit has been a little weird with their implementations.
In my experience Telit has been a little weird with their implementations.
