Wireless Joint

WiFiX NEXS2GO 4G 5G Ready Router with Dual Band (2.4GHz-5GHz) WiFi

Want to know if there was any 12v or 5v unused power sources on the board. Looking to power a fan. I don't want to hook up to something I shouldn't. I can solder but Identifying what I can and cant touch isn't a skill I've acquired. Worst case scenario I'll run a usb from an outlet.

Thanks, Jake

I would recommend the solder points for the power input barrel plug, this is at 12V at between 3-4A. As long as the fan isn't drawing more than ~150 milliamps, it should not affect the router.

Just note, this fan will be on constantly, with no means to control the speed. This would require an additional PWM control.