Hi, I have installed a modem Sierra.
I am able to connect to the internet through the router and browse. However, the router portal page does not show signal information.
On the option: MODEM / NETWORK STATUS
Signal information shows as follows:
Network :
CSQ : 0
Signal Strength : 0%
RSSI : <= -113 dBm
ECIO3G/RSRQ4G/SS_RSRQ5G : -
RSCP3G/RSRP4G/SS_RSRP5G : -
SINR : -
It does not show band information either.
The modem I installed is the Sierra model: EM7455 Cat 6 (Sierra Wireless AirPrime) but shows on the router as "Sierra_Wireless,_Incorporated DW5811e_Snapdragon™_X7_LTE".
Any ideas ?
Thank you.
Router Firmware Version: GoldenOrb_2022-04-19
Modem installed: Sierra model: EM7455 Cat 6 (Sierra Wireless AirPrime) but shows on the router as "Sierra_Wireless,_Incorporated DW5811e_Snapdragon™_X7_LTE".
WiFix NEXS2GO - Does not show signal data with Sierra EM7455
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: WiFix NEXS2GO - Does not show signal data with Sierra EM7455
That modem is out of a laptop. Those are Dell branded EM7455's in order to get it to show up correctly Inthink you'll have to modify the PIDA and USB Product Name to match a base Sierra EM7455. The router firmware identifies the modem based on the USB VID and PID.
Check out Daniel Woods Github for info on modifying a Sierra modems identity.
Check out Daniel Woods Github for info on modifying a Sierra modems identity.
