USB 3.0 M.2 Version 2 - Sled Issues
Posted: Sat Mar 19, 2022 5:01 pm
Hello,
I'm experiencing some issues with the newer USB 3.0 M.2 Modem sleds from LTEFIX.
I've purchased 2 of these, and a coworker has also purchased one, and all 3 are experiencing the same issue.
Issue: While the modem is in the sled, it never connects to LTE
-I can take said modem out and use a m.2 adapter for the NEX6GO, and it will connect.
-I can put the modem in the V1 USB sled from a year or so ago from LTEFIX, and it will connect without issue.
-I've tried a 4A 12v Power supply from LTEFIX and a 5amp 12v Netgear power supply I have, I've provided the sled its own power, tried 5v and 12v.
-I've tried a EM12g, EM7411, EM7455 and a EM06 in these sleds, all have the same results. Nothing ever connects.
-I have tried these sleds plugged into a NEX6GO and a GL 1300 flashed with rooter.
-I've verified sma connectors/pigtails are good, and even swapped those out with some spares.
Watching the debug window, nothing ever happens.
This message will loop for 10 minutes:
I have purchased probably 5-10 of the original version 1 sleds in the past, still have a few, no issues with those. I can use the original V1 sleds without external/extra power, and the modems will still connect and work.
Is there something about the newer sleds thats different? Seems odd that I have the exact same issue across 3 sleds in the past 6 months.
Thanks for any insight!
-hw
I'm experiencing some issues with the newer USB 3.0 M.2 Modem sleds from LTEFIX.
I've purchased 2 of these, and a coworker has also purchased one, and all 3 are experiencing the same issue.
Issue: While the modem is in the sled, it never connects to LTE
-I can take said modem out and use a m.2 adapter for the NEX6GO, and it will connect.
-I can put the modem in the V1 USB sled from a year or so ago from LTEFIX, and it will connect without issue.
-I've tried a 4A 12v Power supply from LTEFIX and a 5amp 12v Netgear power supply I have, I've provided the sled its own power, tried 5v and 12v.
-I've tried a EM12g, EM7411, EM7455 and a EM06 in these sleds, all have the same results. Nothing ever connects.
-I have tried these sleds plugged into a NEX6GO and a GL 1300 flashed with rooter.
-I've verified sma connectors/pigtails are good, and even swapped those out with some spares.
Watching the debug window, nothing ever happens.
This message will loop for 10 minutes:
Code: Select all
Sat Mar 19 21:37:16 2022 : /dev/ttyUSB2 AT+CPMS="SM"
+CPMS: 0,30,0,30,0,30
OK
Is there something about the newer sleds thats different? Seems odd that I have the exact same issue across 3 sleds in the past 6 months.
Thanks for any insight!
-hw