Wireless Joint

$139
Its the BEC Ridgewave 6300NEL R15

It has a Sierra MC7455 inside, and is actually pretty solid.

It has a special hidden page for TTL adjustments. You can set AT commands, etc.

SMA antenna connectors on the sides. Internal WiFi, with U.fl connectors on the board if you want to add some SMA antennas for the wifi.

Really a solid unit that has been a staple for WISPS.

I used these with ATT tablet/iPad SIMs with no problems. I can also help you get a hotspot data plan that works in these.
Update: Also works with the new Tmobile business tablet plans.

$139 for the Router, some antennas, and power supply. Does not include shipping.

Hi there could you share where is the hidden page to get in to that section?

Thanks in advance

It's only working on the custom firmware that are made for these specific routers. Here is the link:

192.168.1.254/cgi-bin/hidden_3g_ttl.asp

Update. I also have these working with the new Tmobile Business tablet plans.

Price reduced to $139

Mind helping me out on how it works? Cuz I'm from Puerto Rico and I think it doesn't work for me please it's the only router I have

Mind helping me if my ISP can work on the ridgewave?

Sure, what have you done so far and what is the carrier and APN used?

Didneywhorl wrote: ↑Fri Aug 26, 2022 12:42 pm Sure, what have you done so far and what is the carrier and APN used?

So far I use carrier called claro pr the APN is lte.claropr.com

Show me a screenshot of where you are putting the APN into the UI.

Also, is it a phone SIM plan, tablet, or hotspot?

Phone sim plan and I'm not at home right now but I'll do that when I get home

Here's what I got

Put the LTE band to all and delete the phone number field.

Change authentication protocol to PAP

Disable IP passthrough and usage allowance.

Yumesasaki76 wrote: ↑Fri Aug 26, 2022 2:41 pm Phone sim plan and I'm not at home right now but I'll do that when I get home

Does the phone plan include hotspot?

You'll need to set the TTL/HL to 65: http://192.168.1.254/cgi-bin/hidden_3g_ttl.asp

it says 404 server not found

try just: 192.168.1.254/cgi-bin/hidden_3g_ttl.asp

Same just 404 error server not found

hmmm. I'll do some digging

Okay

I just tested mine. Are you sure you don't have some kind of pop-up blocker or other thing on the browser? Use an incognito/private browser tab and try:

http://192.168.1.254/cgi-bin/hidden_3g_ttl.asp

again.

It should bring up this: What is your firmware version?

the firmware version is the out of the box version basically

1.06.1.197

Just updated the router but i have 2 problems
1. It doesn't read my sim card at all
2. I don't know which TTL and HL to put

You'll have to check a cell phone and see what TTL it is using. Make the TTL and HL on the router the same, maybe +/- 1 or 2 on that # you get. Trial and error.

The SIM card is odd. Make sure it is seated properly.

TheWirelessHaven tests the routers with their own SIM cards before shipping, because there are some refurbished units that have had damaged SIM pins from people putting the wrong size sim card in and then damaging the pins by pulling it out.

I guess I got mine damaged and believe me I try and try so much for it to work and nothing all I can do is ask for a refund please I don't want to deal with the headache anymore

email the store. They'll take care of you.

Ok thanks for trying man