Upgraded to NEXQ6GO and can't connect.
Posted: Wed Dec 01, 2021 5:57 pm
So I've been on a Sprint LTE connection for a few years. Originally using a ZTE Hotspot, then moved to a PC running Rooter GoldenOrb with a USB adapter containing an EM7455 connected to a couple log periodic antennas. This setup worked pretty well, but I decided to switch to the NEXQ6GO router. I configured it the same as the Rooter PC setup, but it never connects to the LTE service. It detected the sim/modem because the information is populated. In the debug command window, the last command is
/dev/ttyUSB2 AT+CPMS="SM"
+CPMS: 0,0,0,0,0,0
OK
Does anyone know what the problem may be?
/dev/ttyUSB2 AT+CPMS="SM"
+CPMS: 0,0,0,0,0,0
OK
Does anyone know what the problem may be?