Wireless Joint

Living in the country, trying to get some more reliable internet until Starlink is available. I am using Calyx internet with a Linkzone hotspot and want something a little more powerful for home use. I bought a WE826-T2 router and Sierra MC7455 modem to try to get working. (I'm not sure if it matters, but it's a Wiflyer model router). I tried putting GoldenOrb on it but when I tried it gave me wrong device errors, so I just tried chugging along with the installed OpenWRT on it.

Dial mode set to QMI, APN set to r.ispsn. Detects my sim, my provider, and gets a signal (51%). However, I get no internet through it. Here's the log information:

2019-11-
02 00:07:01 found 1199:9071 (Sierra Wireless, Incorporated Sierra Wireless MC7455 Qualcomm Snapdragon X7 LTE-
A) for wwan0
at device is /dev/ttyUSB2
config wwan0, proto is qmi
device driver is qmi_wwan
2019-11-02 00:07:01 stopping connection for wwan0 ...
dial method is quectel-CM
2019-11-02 00:07:01 Prepare to starting connection for wwan0 ...
Setting APN to r.ispsn...
[11-02_00:07:15:474] Quectel_Linux_ConnectManager_SR01A01V23
[11-02_00:07:15:474] /usr/bin/quectel-CM profile[1] = r.ispsn///0, pincode = (null)
[11-02_00:07:15:475] Find qmichannel = /dev/cdc-wdm1
[11-02_00:07:15:475] net_path = /sys/class/net/wwan1
[11-02_00:07:15:475] Find usbnet_adapter = wwan1
[11-02_00:07:15:483] cdc_wdm_fd = 9
[11-02_00:07:16:484] QmiThreadSendQMITimeout pthread_cond_timeout_np=145, errno: 22 (Invalid argument)
<<<repeated 10 times>>>
[11-02_00:07:35:488] main Failed to QmiWwanInit: 22 (Invalid argument)

Any help would be greatly appreciated.

I'm not familiar with that firmware. Are you using the generic firmware image on the modem? AT command to see : Try this one if you feel adventurous: https://thewirelesshaven.com/nexq6go-firmware

Use this method to flash: https://wirelessjoint.com/viewtopic.php?f=21&t=2051

PDF in the zip file has all the flashing methods as well.

I was able to get that firmware flashed on it, and it connected, but it's extremely slow? Like I can't even load a website.

The modem is using generic firmware.

I was able to get online, I'm actually using it right now. I'm getting comparable speeds to my hotspot I was using before. I've tried locking into different bands, but the only band I've been able to get reliable connection/speed from is Band 26. I'm getting about 10Mbit/s.

My antenna stats are:
Signal Strength - 64%
RSSI: -73dBm
RSRQ: -12.5dB
RSRP: -101dBm
SINR: 9.6dB

I'm guessing my best course of action would be to try to improve my signal strength?

Yes, signal strength above most all else. Signal quality as well. Your SINR is decent, but might be able to be inproved.