Page 1 of 1
WG3526/EM20-needs a firmware update
Posted: Fri Jul 23, 2021 10:17 am
by RockyinNM
New to doing firmware updates, have router/modem listed in title with a GoldenOrb build of---1-21-2020---looking for a stable upgrade.
Using a Verizon post paid tablet plan, in QMT mode--tried MBIM mode and pings doubled, but DL/UP speeds were close.
Thanks for your thoughts
Re: WG3526/EM20-needs a firmware update
Posted: Sun Jul 25, 2021 10:53 pm
by Didneywhorl
The newer firmware versions fix the MBIM ping issue, though you can manually fix it if you want.
Otherwise....
WiFiX:
https://drive.google.com/file/d/1Z1ts4R ... sp=sharing
Rooter: http://aturnofthenut.com/upload/WG3526-GO2021-02-05.zip
Untested Rooter builds: http://www.aturnofthenut.com/autobuilds/ZBT-WG3526-GO2021-07-16-AB.zip
Re: WG3526/EM20-needs a firmware update
Posted: Mon Jul 26, 2021 8:22 pm
by RockyinNM
Didneywhorl, do you have any working knowledge, or shared knowledge that this would be an improvement to the firmware that I'm currently running? (1-21-2020) I hate to screw up a good thing--lol thanks for your time!
PS-How do you fix MBIM mode-with older firmware, can you share, or link me to it. Would it fix the disconnects on Verizon tablet plan-post paid?
Re: WG3526/EM20-needs a firmware update
Posted: Thu Jul 29, 2021 8:10 am
by Didneywhorl
Not sure of changes. But over a year out is a bit dated. You can always put it back.
Ill dig up the mbim stuff.
MBIM fix only decreases ping. That's all, as far as I know.
Re: WG3526/EM20-needs a firmware update
Posted: Thu Jul 29, 2021 11:21 am
by RockyinNM
OK thanks-no worry on the ping fix
Re: WG3526/EM20-needs a firmware update
Posted: Sat Aug 07, 2021 6:59 am
by RockyinNM
I finally installed the WiFix update-working great!!
thanks
WiFiX:
https://drive.google.com/file/d/1Z1ts4R ... sp=sharing