Page 1 of 1
WE826 and MC 7354 with Verizon
Posted: Thu Jul 22, 2021 12:09 pm
by willmw
Had a Mofi setup at my parent's house and it was working great with a Verizon hotspot sim. Lightning happened and so I tried to replace the setup with a The Wireless Haven WE826 and an MC 7354. I put the vzwinternet in for the APN and when the router boots up, I see 'connecting' and eventually it shows Verizon and appears to be connected, but nothing works beyond that. Are there other settings I need to enter to get this working? With the Mofi it was as easy as select carrier and go, but I fear I may need to do more with this setup than just APN that I'm not aware of.
Suggestions?
Re: WE826 and MC 7354 with Verizon
Posted: Thu Jul 22, 2021 7:16 pm
by Didneywhorl
The MC7354 is pretty old, but should technically work. The MOFI likely had a MC7455 or EC25AF in it.
Verizon is goofy with their accounts. Did you get a notification asking you to register the new device?
Re: WE826 and MC 7354 with Verizon
Posted: Thu Jul 22, 2021 7:48 pm
by willmw
Not directly. I had put the sim back in the hotspot for the time being while waiting for the parts. Once I'd given up trying the WE826/MC7354 combo and put the sim back in the hotspot, I got an email from VZW asking me to confirm that I had changed my device FROM the hotspot TO the hotspot. Oddly there was no mention of the MC7354, however there had never been any mention/notification of the change to the MOFI.
The MOFI did have a 7455 but I figured for the limited amount of signal in this location I could get away with the 7354 for much less money.
Re: WE826 and MC 7354 with Verizon
Posted: Fri Jul 23, 2021 11:47 am
by Didneywhorl
You might be right. Ive personally never tested it.
Did you use MBIM mode for protocol? Im not entirely sure its needed, but all the devices aive run on Verizon had to use MBIM drivers/protocol
Re: WE826 and MC 7354 with Verizon
Posted: Fri Jul 23, 2021 5:19 pm
by willmw
I think it defaulted to QMI. Not sure how to change it, but will research unless it's something simple enough that you don't mind dropping the commands here or can easily point me to same.
Re: WE826 and MC 7354 with Verizon
Posted: Sun Jul 25, 2021 6:34 pm
by Didneywhorl
start with:
then should try:
and tell us what it says.
Here is the command manual:
4118014 AirPrime EM73xx-MC73xx AT Command Reference.pdf
Re: WE826 and MC 7354 with Verizon
Posted: Mon Jul 26, 2021 1:28 pm
by willmw
AT!ENTERCND="A710"
OK
AT!UDUSBCOMP?
!UDUSBCOMP: 6
OK
There is currently no SIM in the device as I'm not onsite and the SIM is there in the jetpack currently in use. Based on the manual, I believe this confirms QMI. I will peruse the manual further.
From the manual appears there are several settings that show MBIM. Which to choose? I tested with 8 to verify that my understanding of the syntax was correct and the AT!UDUSBCOMP? returned 8 as expected.
Re: WE826 and MC 7354 with Verizon
Posted: Thu Jul 29, 2021 7:51 am
by Didneywhorl
The one with the most interfaces. Im mobile now and cant look it up.