Page 1 of 1

Mobile Citizen sim card in a WG1608 doesn't work

Posted: Thu Mar 18, 2021 4:15 pm
by averrslowly
The sim card works fine in the Coolpad Surf it came in, but the WG1608 with the latest firmware doesn't detect it at all. The router is new and shows no other signs of being faulty, so assuming that this is not a problem with the hardware, does anyone have any insights or ideas about this?

For background, others have posted on this board about their successful efforts to use Mobile-Citizen supplied sim cards with Rooter and generic routers.

Re: Mobile Citizen sim card in a WG1608 doesn't work

Posted: Fri Mar 19, 2021 12:57 pm
by radec
The WG1608 is just a router correct? what modem are you using in it?

When you say:
The sim card works fine in the Coolpad Surf it came in, but the WG1608 with the latest firmware doesn't detect it at all.

Are you saying that the router doesn't detect the sim card at all? Or some other connection issue?

If it is not seeing the sim card at all, then it just might not be fully/correctly seated in the simcard slot.

At any rate if you are looking for help, more information about your setup and the errors you hard having would be useful.

Re: Mobile Citizen sim card in a WG1608 doesn't work

Posted: Fri Mar 19, 2021 2:01 pm
by MattB29
You have been having trouble with sim card detection from your two threads on it. Have you done a hard reset and reload of firmware for your WG1608?

Re: Mobile Citizen sim card in a WG1608 doesn't work

Posted: Tue Mar 30, 2021 3:16 pm
by averrslowly
That's right, the router doesn't detect the sim card at all, though the sim card works in my Coolpad Surf. There really is no more information about my setup that is relevant. It's a router with a modem and a sim in an urban environment with no need of outdoor antennaes. The router doesn't detect the sim card. No errors, just no sim card detected so no signal received.

I did do a hard reset of the router, but did not try reloading the firmware. I'll try the latter - thanks for the suggestion.