WG3526-P w/ EM7565 Speed issues
Posted: Sun Jan 17, 2021 2:21 am
Ok, please bear with me since this is my first forum post EVER.
I installed a WG3526-P router with an EM7565 modem in it. I hooked up two standard Wilson wide-band directional yagi antennas via two 10ft LMR-200 coax cable from the thewirelesshaven.com store to the router. I followed all the guides outlined in the description of the router on the The Wireless Haven store. I got the modem and router up to date on firmware and installed the latest WiFix software. I have the antennas mounted on a pole screwed to the highest point on my house, but I am only getting 10mbps. Note: I am only 9 miles from the tower. This wouldn't concern me as much if I didn't have a mofi4500 v2 installed at my uncle's house (same property) with an antenna setup that is quite a bit lower to the ground. The mofi is getting 80mbps!! It is really bothering me that the mofi is outperforming the WG3526. Below are screenshots of the gstatus of the modems. Any help would be greatly appreciated.
I installed a WG3526-P router with an EM7565 modem in it. I hooked up two standard Wilson wide-band directional yagi antennas via two 10ft LMR-200 coax cable from the thewirelesshaven.com store to the router. I followed all the guides outlined in the description of the router on the The Wireless Haven store. I got the modem and router up to date on firmware and installed the latest WiFix software. I have the antennas mounted on a pole screwed to the highest point on my house, but I am only getting 10mbps. Note: I am only 9 miles from the tower. This wouldn't concern me as much if I didn't have a mofi4500 v2 installed at my uncle's house (same property) with an antenna setup that is quite a bit lower to the ground. The mofi is getting 80mbps!! It is really bothering me that the mofi is outperforming the WG3526. Below are screenshots of the gstatus of the modems. Any help would be greatly appreciated.