Page 1 of 1
Mofi 4500 Sim7 How to Run AT commands
Posted: Tue Nov 24, 2020 2:03 pm
by jcarver81
Anybody have the newer Sim7 model of the Mofi 4500? I can't figure out how to run AT commands. I'm unsure if my second antenna is actually being used. The signal status page does not show a separate reading for the diversity antenna.
Re: Mofi 4500 Sim7 How to Run AT commands
Posted: Tue Nov 24, 2020 2:15 pm
by jcarver81
Screen Shot 2020-11-24 at 12.14.29 PM.png
Re: Mofi 4500 Sim7 How to Run AT commands
Posted: Mon May 31, 2021 4:55 am
by BillA
jcarver81 wrote: ↑Tue Nov 24, 2020 2:03 pm
Anybody have the newer Sim7 model of the Mofi 4500? I can't figure out how to run AT commands. I'm unsure if my second antenna is actually being used. The signal status page does not show a separate reading for the diversity antenna.
Simply flash either of these firmwares:
Here's the latest WiFix firmware for the WE826-T2/GO-U/MoFi-SIM3/4/7/8 dated 2020-05-16.
https://drive.google.com/file/d/1omKTO7 ... d3vAyM5Kk/
OR
Here's the latest GoldenOrb firmware for the WE826-T2/GO-U/MoFi-SIM3/4/7/8 dated 2021-05-13.
https://aturnofthenut.com/upload/we826- ... -05-13.zip