Wireless Joint

Do I need one of these to power my WE826-T2 with POE:
https://www.amazon.com/dp/B01HMNJHII/re ... FbEFV6ZF5
Or does it natively support POE?

My current equipment is:
https://www.amazon.com/dp/B07F8Z2RQL/re ... TF8&psc=1
https://www.amazon.com/dp/B00FB45SI4/re ... OFb44PN3QH
https://www.aliexpress.com/item/3300303 ... 4c4d28fbES

Hello,
Yes need a splitter. Looked at the one you linked. Believe it said 1.5 amps. Not enough power to run the modem. Your modem will fail and disconnect without enough power. Look at this one.
https://thewirelesshaven.com/shop/poe-splitters/4 ... -splitter/

For reference on POE items needed can look at this link.
https://wirelessjoint.com/viewtopic.php?f=15&t=1208#p7869

Sincerely doubt that antenna gains 22 Dbi. Considering that is what a parabolic does. But please let us know how well it does. Could be a good antenna just think it is labeled incorrectly.

Thank you so much! Just ordered one.

Not sure what the antenna is actually rated in gain, definitely not 22dbi. There was somewhat of an improvement in my speeds from the antennas that came with the router. It is also just mounted in a closet right now pointed at a window. I'll be putting it on a pole as soon as I get that adapter in

What are you using to inject the poe?

https://www.amazon.com/dp/B07F8Z2RQL/re ... TF8&psc=1

Port 1, can do up to 65w. My cameras are on the other ports.