WG3526-P x EM20-G x 4x4 mimo POE Outdoor Installation
Posted: Sat Sep 19, 2020 10:53 am
Now that the store is up and running again I am looking at the WG3526-P x EM20G with 4x4 mimo antenna setup installed in the outdoor antenna type enclosure https://thewirelesshaven.com/shop/routers/r-acces ... enclosure/
and I have a few questions.
--The antennas for the WG3526-P are as shown as
2 x 4G LTE Antennas
2 x 2.4GHz Antennas
2 x 5GHz Antennas
--Will router modification be required to attach the 4x4 mimo antennas?
--The unit will be mounted on the west wall of the building and will be exposed to late afternoon and evening sun. Will the router overheat inside the enclosure?
--The POE Injector recommended for the router is Out of Stock. What is the power requirement for this router/modem set up? Voltage, amps, watts? Or other recommendation?
and I have a few questions.
--The antennas for the WG3526-P are as shown as
2 x 4G LTE Antennas
2 x 2.4GHz Antennas
2 x 5GHz Antennas
--Will router modification be required to attach the 4x4 mimo antennas?
--The unit will be mounted on the west wall of the building and will be exposed to late afternoon and evening sun. Will the router overheat inside the enclosure?
--The POE Injector recommended for the router is Out of Stock. What is the power requirement for this router/modem set up? Voltage, amps, watts? Or other recommendation?