Page 1 of 1

WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Wed Apr 04, 2018 10:14 pm
by JimHelms
This tutorial will demonstrate the process of flashing the firmware on the WE826-T router. The procedure is the same for other WE | WG LTE routers with the only difference is selecting the correct firmware for the router.

The WE|WG series of routers are loaded with OpenWRT firmware. Some users may find the OEM firmware adequate. Others may prefer a different build of firmware to accommodate special requirements. Still others may simply want to explore different firmware builds.

The WiFiX version of GoldenOrb is available for all of the WE/WG routers.

Place the downloaded firmware in a folder that is easily accessible--for instance, your PC desktop.

1. Open a web browser and type the routers default IP address of [url=http://192.168.1.1 ]192.168.1.1 [/url] and hit Enter on your keyboard

Firmware 1.png


When the OpenWRT LuCI (web interface) opens:

2. Type the WE826 OpenWRT default Username “root”

3. Type the WE826 OpenWRT default Password “admin”

4. Click the “Login” button

Firmware 2.png


Once logged in to the OpenWRT LuCI:

5. Select the “System” tab on top of the toolbar

6. Select the “Backup/Flash Firmware” from the drop-down menu

Firmware 3.png


When the “Flash operations” page opens:

7. Remove the check mark from the “Keep settings” box

8. Click on the “Choose File” button and direct the window to the WE826 file folder on the desktop containing the GoldenOrb firmware

9. Select the lede-we826-G02017-xx-xx.bin firmware. It should now appear in the File name window

10. Click the “Open” button

Firmware 4.png

11. Once again, make sure the “Keep Settings” box is unchecked

12. Check that the firmware image you selected is the correct

13. Click on the “Flash image” button

Firmware 5.png

14. When the “Flash Firmware—Verify” page opens, you have the option to “Checksum” and compare its number to that of the original file number. The Checksum numbers are SHA256 and may be verified at the Github site.

15. Click the “Proceed” button to begin flashing the firmware

Firmware 6.png

16. The “System—Flashing” page will now appear. Play careful attention to the information. Allow several minutes for the flashing process. Leave your web browser open and, once flashed, GoldenOrb LuCI should open automatically

Firmware 7.png


You are now ready to login and configure WiFiX/GoldenOrb using this TUTORIAL.

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Wed Aug 26, 2020 5:52 pm
by ltegg
Hello, the WiFix link seems to be down (https://thewirelesshaven.com/wifix-router-firmware/) Thank you!

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Thu Sep 03, 2020 1:44 am
by Sang15512
Thank you for all your help

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Sun Sep 04, 2022 9:03 am
by hydrocynus
Does this work on a WE826-T2?

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Tue Sep 06, 2022 12:13 pm
by Didneywhorl
hydrocynus wrote: Sun Sep 04, 2022 9:03 am Does this work on a WE826-T2?
The Process does, yes.

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Thu Sep 08, 2022 9:50 pm
by hydrocynus
Thanks! Which firmware should I flash? I have seen so many, I am getting lost. Thanks for providing me with a link.
Cheers

Re: WE826 | WG3526 | WE3926 | WE1326 | WE1026 - Flashing the Firmware

Posted: Fri Sep 09, 2022 9:33 am
by Didneywhorl
http://www.aturnofthenut.com/autobuilds/ZBT-WE826T-GO2022-09-08-AB19.zip

I'd try this one.