Page 1 of 1
Calyx Sim in a AER1600-LP6
Posted: Mon Sep 07, 2020 7:47 am
by diggitys00
I am in the process of migrating a Calyx Sim card from a Sierra Wireless MC7455 to a Cradlepoint AER1600-LP6 router/modem.
I am getting an error: “AutoSelect failed: all profiles failed connection”
error.png
info.jpg
The “default override” APN is set to r.ispsn,
APN Override.png
however the modem appears to be trying to connect to OTASN.
otasn profile 1.png
Any ideas?
Re: Calyx Sim in a AER1600-LP6
Posted: Thu Sep 10, 2020 9:04 pm
by Didneywhorl
You may have to use the CLI interface and run ATTERM and run commands to ensure its using the generic firmware, clear out the APN info (AT+CGDCONT commands) and maybe even manually enter the APN with the AT+CGDCONT command. Look up this command on this forum for tons of info.
Re: Calyx Sim in a AER1600-LP6
Posted: Fri Sep 11, 2020 10:11 pm
by Yipzy
You are going to have a bad time with Cradlepoint due to the way they have the Sierra Wireless modems set up. It will switch to Sprint firmware automatically and so far no one has figured out how to disable that in order for your Calyx sim to work on generic firmware. Search on the forums. Many people have this problem.