Wireless Joint

Posted: **Sun Sep 06, 2020 11:17 am**

I'm trying to upgrade my MoFi with an LM960. I've flashed the latest GoldenOrb for the WE826 but it doesn't recognize the LM960 I've installed in the mPCIe slot. Is there a compatibility issue I've overlooked?

Before someone asks, I know the WE826 is only capable of 100mbps ethernet but I'm fine with that since this location with a WG3526+LM960 setup only peaks slightly higher than that at 125mbps (averaging 40-75mbps most of the day) and we feel the WG3526 would do more good at another location which we use more often (and has a better shot of benefiting from the faster gigabit LAN and 4x4 MIMO). I'd rather not buy another WG3526 if I don't have to.

Thanks for any help.

Posted: **Mon Sep 07, 2020 12:05 am**

lynyrd65 wrote: Sun Sep 06, 2020 11:17 am I'm trying to upgrade my MoFi with an LM960. I've flashed the latest GoldenOrb for the WE826 but it doesn't recognize the LM960 I've installed in the mPCIe slot. Is there a compatibility issue I've overlooked?

Try to put it in MBIM mode if not already.

Code: Select all

AT#USBCFG=?
AT#USBCFG?
AT#USBCFG=2

Wireless Joint

Troubles upgrading MoFi 4500 (WE826) with LM960

Troubles upgrading MoFi 4500 (WE826) with LM960

Re: Troubles upgrading MoFi 4500 (WE826) with LM960