Sharing Innovative Ideas and Solutions
https://mail.wirelessjoint.com/
SoViper67857 wrote: Sun Aug 16, 2020 4:01 pm I think you need a ,1 at the end to enforce it immediately, else it takes effect next reboot.
Do you get an OK response after issuing the command?Mcons wrote: Sun Aug 16, 2020 7:31 pm Attempted different command still not locking bands at all even when I try to force just one
Your band lock is for Sprint bands 41, 25 and 26. How are you connected to band 2 if your using a Sprint SIM card?Mcons wrote: Sun Aug 16, 2020 2:37 pm No matter what command I put in for bands it continues to use whatever band it wants, I've tried factory reseting it.
"AT+QCFG="band",0,10003000000"
OK
Command i use and it connects to band 2 instead
Code: Select all
AT+QCFG="band",0,10003000000Code: Select all
,0,1TDS_bandval isnt used, default 0AT+QCFG: "band"[,<WCDMA_bandval>,<LTE_bandval>,<TDS_bandval>[,effect]]
Code: Select all
AT+QPRTPARA=1I had a period of time on my tmobile sim where I could use sprint lte bands and now I csnt all of a suddenDidneywhorl wrote: Sun Aug 23, 2020 12:24 pm Your band lock is for Sprint bands 41, 25 and 26. How are you connected to band 2 if your using a Sprint SIM card?
Also the command doesnt have a " at the end
Code: Select all
AT+QCFG="band",0,10003000000
I am on a Sprint Sim and connected to T-Mobile band 2 and it is working. I left the APN blank and forced it to band two and it worked. I am not recommending this, but it worked for me. The Sprint bands would give me inconsistent connections with varying d/l and u/l speeds.Didneywhorl wrote: Sun Aug 23, 2020 12:24 pm Your band lock is for Sprint bands 41, 25 and 26. How are you connected to band 2 if your using a Sprint SIM card?
Also the command doesnt have a " at the end
Code: Select all
AT+QCFG="band",0,10003000000