Is there a WiFix specific load balancing tutorial on the site?
Posted: Fri Jul 24, 2020 4:37 pm
i found some info here
https://wirelessjoint.com/viewtopic.php?f=32&t=956&start=50
which is great
but i was wondering if there is a full blown walk through for WiFix firmware specifically load balancing setup i missed?
Ill tip anyone who has it ready to go $20
https://wirelessjoint.com/viewtopic.php?f=32&t=956&start=50
which is great
Code: Select all
Router1: WE1326/Sierra EM7565/ATT Tablet plan
Router2: WE826-T2/USB Note5 phone/ATT prepaid plan
Loadbalance: "wan" interface = internal sierra | "wan1" interface = ethernet cable from Router1 to Router2 WAN port.
That is just how I have it setup currently. You could just as easily use only 1 router and have the usb phone plugged in directly to "Router1" in the above setup to it's usb port.
fyi, if you end up using load balancing dont forget to enable Modem/Connection Profile/Advanced/..."Enable Load Balancing at Connection=yes" to make it persistent across reboots. Took me forever to track that down.
Ill tip anyone who has it ready to go $20