Page 1 of 1

WE826GO and Page Plus

Posted: Thu Apr 30, 2020 1:03 pm
by dc5378
I just got a web826go with sierra 7455 and goldenorb installed, the seller said they had bought it from Wireless Joint so I'm looking for some help here. I am trying to use a page plus sim card that I've used in la Novatel T1114v for years, if you're a dealer or get a dealer to activate a page plus sim and put on their own account you don't get throttled at 60GB, it's 204GB. I've already reset the router and made sure the sim card still worked in a phone and I did use tracfone.vzwentp for the apn under modem on the admin page but I'm still not getting connected. Can anyone please tell me what I'm overlooking. Thanks

Re: WE826GO and Page Plus

Posted: Sun May 03, 2020 5:58 am
by BillA
dc5378 wrote: Thu Apr 30, 2020 1:03 pm I just got a web826go with sierra 7455 and goldenorb installed, the seller said they had bought it from Wireless Joint so I'm looking for some help here. I am trying to use a page plus sim card that I've used in la Novatel T1114v for years, if you're a dealer or get a dealer to activate a page plus sim and put on their own account you don't get throttled at 60GB, it's 204GB. I've already reset the router and made sure the sim card still worked in a phone and I did use tracfone.vzwentp for the apn under modem on the admin page but I'm still not getting connected. Can anyone please tell me what I'm overlooking. Thanks

Make sure that the APN is set to "tracfone.vzwentp" (without the quotes), and the TTL is set to 117 (if it doesn't work with 117, you can try 63/64/65/66, make sure to Save&Apply, then restart the router after each change). And it's true that when set up though a dealer, there are less restrictions.

Re: WE826GO and Page Plus

Posted: Tue May 05, 2020 10:49 pm
by dc5378
Much thanks for the quick responses and I'll be doing this as soon as I get home in the morning

Re: WE826GO and Page Plus

Posted: Mon May 18, 2020 1:54 pm
by dc5378
I still seem to be having trouble with this, hoping none of the hardware is bad, I did see a section in the settings this morning under troubleshooting I believe, I'm going to try to upload that information here and see if anyone can see what I'm doing wrong.
Software-Version
-------------------------------------------------
OpenWrt - GoldenOrb_2020-03-01 ( OpenWrt 18.06.7 )
LuCI - git-20.029.49294-41e2258


Output of "ip a show"
-------------------------------------------------
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/ether 78:a3:51:6b:92:80 brd ff:ff:ff:ff:ff:ff
inet6 fe80::7aa3:51ff:fe6b:9280/64 scope link
valid_lft forever preferred_lft forever
3: ifb0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
link/ether 42:5b:4b:f0:07:0b brd ff:ff:ff:ff:ff:ff
4: ifb1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 32
link/ether 3e:6a:ae:80:df:5c brd ff:ff:ff:ff:ff:ff
5: wwan0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UNKNOWN group default qlen 1000
link/none
inet 100.118.58.245/30 brd 100.118.58.247 scope global wwan0
valid_lft forever preferred_lft forever
inet6 fe80::3443:a09f:bb97:9d51/64 scope link stable-privacy
valid_lft forever preferred_lft forever
6: wwan1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether c2:21:9c:3e:11:92 brd ff:ff:ff:ff:ff:ff
12: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 78:a3:51:6b:92:80 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.1/24 brd 192.168.1.255 scope global br-lan
valid_lft forever preferred_lft forever
inet6 fd1e:a425:1160::1/60 scope global noprefixroute
valid_lft forever preferred_lft forever
inet6 fe80::7aa3:51ff:fe6b:9280/64 scope link
valid_lft forever preferred_lft forever
13: eth0.1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP group default qlen 1000
link/ether 78:a3:51:6b:92:80 brd ff:ff:ff:ff:ff:ff
14: eth0.2@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 78:a3:51:6b:92:81 brd ff:ff:ff:ff:ff:ff
inet6 fe80::7aa3:51ff:fe6b:9281/64 scope link
valid_lft forever preferred_lft forever
16: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br-lan state UP group default qlen 1000
link/ether 78:a3:51:6b:92:80 brd ff:ff:ff:ff:ff:ff
inet6 fe80::7aa3:51ff:fe6b:9280/64 scope link
valid_lft forever preferred_lft forever


Output of "ip route show"
-------------------------------------------------
default via 100.118.58.246 dev wwan0 proto static src 100.118.58.245 metric 10
100.118.58.244/30 dev wwan0 proto static scope link metric 10
192.168.1.0/24 dev br-lan proto kernel scope link src 192.168.1.1


Output of "ip rule show"
-------------------------------------------------
0: from all lookup local
32766: from all lookup main
32767: from all lookup default


Output of "ip route list table 1-250"
-------------------------------------------------


Output of "iptables -L -t mangle -v -n"
-------------------------------------------------
Chain PREROUTING (policy ACCEPT 2212 packets, 222K bytes)
pkts bytes target prot opt in out source destination
13 5513 TTL all -- wwan0 * 0.0.0.0/0 0.0.0.0/0 TTL set to 117

Chain INPUT (policy ACCEPT 1480 packets, 183K bytes)
pkts bytes target prot opt in out source destination

Chain FORWARD (policy ACCEPT 667 packets, 24223 bytes)
pkts bytes target prot opt in out source destination
0 0 TCPMSS tcp -- * eth0.2 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
10 520 TCPMSS tcp -- * wwan0 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
0 0 TCPMSS tcp -- * wan2 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* !fw3: Zone wan MTU fixing */ TCPMSS clamp to PMTU
0 0 TCPMSS tcp -- * tun0 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* !fw3: Zone VPN MTU fixing */ TCPMSS clamp to PMTU
0 0 TCPMSS tcp -- * tun-server 0.0.0.0/0 0.0.0.0/0 tcp flags:0x06/0x02 /* !fw3: Zone VPNS MTU fixing */ TCPMSS clamp to PMTU

Chain OUTPUT (policy ACCEPT 3310 packets, 337K bytes)
pkts bytes target prot opt in out source destination

Chain POSTROUTING (policy ACCEPT 3978 packets, 361K bytes)
pkts bytes target prot opt in out source destination
3187 190K TTL all -- * wwan0 0.0.0.0/0 0.0.0.0/0 TTL set to 117