EM12-G not connecting
Posted: Thu Apr 30, 2020 12:43 pm
I'm totally new to this. So please forgive me for my ignorance.
I bought the EM12-G and the M.2 usb enclosure from thewirelesshaven.com. And an AR300M from Amazon which I flashed to the 2020-03-01 Rooter firmware. The modem is only connected to paddle antennas for now until I get get it working and then see if I need something better. But I can't seem to get it working.
I had it working briefly with a Visible sim but can't get it to give internet at all now. I have two sims I've tried it with: Visible and Red Pocket verizon. Both sims work in an iPhone and in an M1. The Rooter firmware recognizes the modem and the sim but won't connect.
I've double checked that the sim is seated properlty (it is recognized anyway, so I don't think it's that), that the pigtails are seated, and that the APN is correct. I'm using a second micro USB cable for supplemental power to the enclosure.
I followed the suggestions in [url=http://wirelessjoint.com/viewtopic.php?f=8&t=1085&p=7344&hilit=em20#p7344]this thread[/url] except for reflashing the Wifix firmware since I don't have a router that takes it. From what I could tell looking at the EM12 manual, the AT commands mentioned in that thread are the same as for the EM12-g. But I feel totally lost with AT commands (as well as MBIM/QMI and modem ports).
What can I do to get this working? I can still return the AR300M and get another router if that would help.
I bought the EM12-G and the M.2 usb enclosure from thewirelesshaven.com. And an AR300M from Amazon which I flashed to the 2020-03-01 Rooter firmware. The modem is only connected to paddle antennas for now until I get get it working and then see if I need something better. But I can't seem to get it working.
I had it working briefly with a Visible sim but can't get it to give internet at all now. I have two sims I've tried it with: Visible and Red Pocket verizon. Both sims work in an iPhone and in an M1. The Rooter firmware recognizes the modem and the sim but won't connect.
I've double checked that the sim is seated properlty (it is recognized anyway, so I don't think it's that), that the pigtails are seated, and that the APN is correct. I'm using a second micro USB cable for supplemental power to the enclosure.
I followed the suggestions in [url=http://wirelessjoint.com/viewtopic.php?f=8&t=1085&p=7344&hilit=em20#p7344]this thread[/url] except for reflashing the Wifix firmware since I don't have a router that takes it. From what I could tell looking at the EM12 manual, the AT commands mentioned in that thread are the same as for the EM12-g. But I feel totally lost with AT commands (as well as MBIM/QMI and modem ports).
What can I do to get this working? I can still return the AR300M and get another router if that would help.