Wg3526 router lights

[dustinleepeterson]

Hi I have wg3526 router with mc7455 aircard with rooters newest firmware everything seems to be ok but I was wondering if there a reason why the lights on front of router do not light up correctly i was wondering if there commands in router to work led lights. Thank you

[Didneywhorl]

What specifically isn't working aka what would you want working?

If I remember right the WAN LED can be configured to shadow the wwan traffic and make it blink.
Are you using the WiFix firmware or straight r00ter or the stock openWRT firmware that comes with it from Chinese vendors?

The Wifix, and I think straight r00ter, has a menu under System that's called "LED Configuration"

I believe there is a post on here that talks about it.

Save your routers config, though, before playing with it!! I jacked up mine somehow playing with it. I wanted to turn all the lights off and somehow got my modem disconnected. A fresh firmware install fixed it, but I didn't save my configs so I had to reset all the settings again like it was a fresh new install.

[Didneywhorl]

https://wirelessjoint.com/viewtopic.php?f=8& ... ghts#p4063

One example found from searching the forum for "WE826 LED lights"

[dustinleepeterson]

I did same thing now I have everything working besides the 3g/4g light when its connected I am running new wifix firmware on wg3526 I was wondering is there an easy way to get light to turn on when connected all my other lights work now with new firmware install but not the 3g/4g light does nothing its not big deal but if easy do you know a trick to command it on when connected with wifix firmware. Thank you

[Didneywhorl]

Try this...

Go to System-->LED Config-->Add new-->

Code: Select all

name: wwan
LED name zbt-we826:green:wan
trigger netdev
device wwan0
trigger mode: check link, transmit and receive.