Mofi 4500 T-Mobile through OTR Mobile
The eth1 interface, which is the cell module, is set to static configuration for the protocol. ipv6 support is not enabled by default. There are multiple options under protocol outside of static. There is dual stack lite, dhcpv6, dhcp client, and a few more. Is there a specific recommendation for T-Mobile? I understand they are pretty much all ipv6.
ipv6 T-Mobile
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
dradiscontact
- Posts: 9
- Joined: Wed Apr 22, 2020 9:34 pm
- Has thanked: 1 time
- Been thanked: 0
-
BillA
- Posts: 1200
- Joined: Sun Dec 01, 2019 6:46 pm
- Location: USA
- Has thanked: 216 times
- Been thanked: 322 times
- Contact:
Re: ipv6 T-Mobile
dradiscontact wrote: ↑Sat May 02, 2020 11:51 am Mofi 4500 T-Mobile through OTR Mobile
The eth1 interface, which is the cell module, is set to static configuration for the protocol. ipv6 support is not enabled by default. There are multiple options under protocol outside of static. There is dual stack lite, dhcpv6, dhcp client, and a few more. Is there a specific recommendation for T-Mobile? I understand they are pretty much all ipv6.
I prefer to use IPv4 exclusively, but you could try all three IPv4, IPv6, or IPv4v6 to see which works the best.
