Inseego M2100 showing mobile network as "Turned Off"
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Inseego M2100 showing mobile network as "Turned Off"
I pulled out an Inseego M2100 from storage and it will not show a cellular signal. In the diagnostics menu, it shows the Network Status as "Turned Off". I have toggled the setting for "Allow to connect to mobile networks". This changed nothing. I did a network scan and it was able to see mobile networks available. Selecting one to manually connect to, did not connect. I have searched online and have not found a solution for reloading the firmware. I have tried a factory reset, but it did not change the issue.
You do not have the required permissions to view the files attached to this post.
-
Rich Hathaway
- Posts: 622
- Joined: Mon Mar 08, 2021 2:41 pm
- Has thanked: 12 times
- Been thanked: 214 times
Re: Inseego M2100 showing mobile network as "Turned Off"
Your ports are already enabled? I ask because this (network turned off) happens usually when someone has been sending commands or editing files trying to do something.
But the answer is the same as I told you over at xda, reload the firm or the modem partition and it will be restored to "on"
But the answer is the same as I told you over at xda, reload the firm or the modem partition and it will be restored to "on"
