IMEI Repair for MR5200

[jcrm2]

Are there any easy step by step instructions on how to repair the MR5200 imei. The MR5100 is now compatible with DC unlocker but unfortunately the MR5200 is not.

[Rich Hathaway]

They are the same device basically, both are M5's, so if dc can do 5100 then just select it for your 5200 and it will work the same to soft code your imei

[jcrm2]

They are the same device basically, both are M5's, so if dc can do 5100 then just select it for your 5200 and it will work the same to soft code your imei

Your absolutely correct. Just received the MR5200 and DC unlocker works as advertise.

[pipestek]

can we flash generic netgear firmware on this like the m1?

[pipestek]

They are the same device basically, both are M5's, so if dc can do 5100 then just select it for your 5200 and it will work the same to soft code your imei

Your absolutely correct. Just received the MR5200 and DC unlocker works as advertise.

can you update firmware on the webui?

[Rich Hathaway]

Yes if you have firmware for it in the proper form

[pipestek]

Yes if you have firmware for it in the proper form

can we do it the same way as the m1 removing batt pressing the power button connecting to usb and then just flash it using the command?

[pipestek]

and for the mr5100

[Rich Hathaway]

Yes if you have an spk file for it, it basically works the same way with the fdt tool.

[Hogwild]

Yeah, but who on earth has the firmware files on disk? I've done a fair amount of reading, and never heard of anyone that has it. If you come across it, please let us know (if you're willing).

Netgear has become very secretive about their firmware starting with the MR2100.

[Rich Hathaway]

I have firmware for it, I did not make it, a friend put it together and I was asked by them not to make it public, custom firmware for this one will be difficult until an sdx55 loader can be patched successfully or the broken boot chain can be repaired that is caused by loading a binary file.

[satyamisme]

I have firmware for it, I did not make it, a friend put it together and I was asked by them not to make it public, custom firmware for this one will be difficult until an sdx55 loader can be patched successfully or the broken boot chain can be repaired that is caused by loading a binary file.

can the loader be applicable to netgear
sdx55 loader

https://github.com/bkerler/Loaders/tree ... c801av.mbn

[Rich Hathaway]

No that is not a correct loader for mr5x00
He shows in his readme file that edl was tested on mr5x00 but it is incorrect, I have ask him to remove that statement from the readme file but it remains.

[bkerler]

That's not incorrect, but earlier devices were in fact with secure boot disabled. Newer models do have secure boot enabled and thus this loader doesn't work anymore.

[Siangko89]

How to add carrier aggregation like this?
I used putty but can only add 1 CA & cannot more than 4 band frequency