How to sit wan static ip
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
screem1234
- Posts: 3
- Joined: Fri Nov 25, 2022 9:24 am
- Has thanked: 0
- Been thanked: 0
How to sit wan static ip
I just installed wifix on my ZBT wg3526 router. And i have static ip from my ISP but it appears dynamic on router login page how to setup the wan static ip ? Please help me
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: How to sit wan static ip
That requires the proper APN from the carrier. The carrier assigns the IP address via proper APN. This sets the wwan0 IP, not the WAN IP.
WAN and wwan0 are completely different interfaces. I'm assuming your using a cell modem? Or are you actually pluggin in an ISP modem to the 35216 WAN port via ethernet? If so, then the modem should apply the IP automatically. Lots of variables here.
WAN and wwan0 are completely different interfaces. I'm assuming your using a cell modem? Or are you actually pluggin in an ISP modem to the 35216 WAN port via ethernet? If so, then the modem should apply the IP automatically. Lots of variables here.
