Bought this from wireless haven. And I tried to flash the latest firmware from the golden orb site and couldn’t get it to flash unless I forced it. There were none that said WE826-T2 only T so I didn’t force it.
I need to do an IMEI repair and the stock software oddly didn’t have the miscellaneous tab for the AT commands to do so.
I really need to change the IMEI and am kinda stuck.
Suggestions?
WE826-T2 setup issues
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
-
Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: WE826-T2 setup issues
I would force the T version. The others are for the Q version. There isn't a T and a T2 that I know of.
Worst case it takes you back to the firmware recovery screen.
You can SSH into the router and change it via terminal commands, or you can remove the modem and SSH into the modem in windows or linux, and send commands that way.
Worst case it takes you back to the firmware recovery screen.
You can SSH into the router and change it via terminal commands, or you can remove the modem and SSH into the modem in windows or linux, and send commands that way.
