Method to upload the good ".bin file" in the WE-826 on Linux Ubuntu with a RJ45 wire [ solve 30-05-2019 ]

[Nico_LTE]

FIRST STEP
Ethernet RJ45 specifications ipv4 in "edit connections"
IPV6 -> ignore

IPV4 :
IP: 192.168.1.5
Mask: 255.255.255.0
Gateway : 192.168.1.1

Connection mode : Manual
=============================================================================
SECOND STEP :
- Log the 192.68.1.1 router "welcome page"
- switch off the router or unpluged it
- Switch on the power and keep push the reset button at the bottom
- Check when the wifi and LAN leds are ligthtening, stop to push the reset button and refresh the 192.68.1.1 page
- Now normally you have a simple web interface to upload the new .bin file without restrictions
- wait the automatic reboot
=============================================================================
FILES DOWNLOADS LINKS :
Below the link for the flash generated with the .bin file for the system "the rooter project" dedicated to the ZBT-WE826(16M):
https://www.ofmodemsandmen.com/download ... -03-10.zip

https://openwrt.org/toh/zbt/we-826
downloads.openwrt.org/releases/18.06.2/targets/ramips/mt7620/openwrt-18.06.2-ramips-mt7620-zbt-we826-16M-squashfs-sysupgrade.bin
=============================================================================
SOURCE : WINDOWS METHOD
https://wirelessjoint.com/viewtopic.php?f=12&t=5

[JimHelms]

You may want to move this topic to either the tutorial section, or the Router > WE\WG topic where it is easier to locate. Good write-up.