EM12-G FIrmware

[gutowscr47]

I've searched in here and found some downloads, but would like to get the newest firmware for my EM12-G I just ordered from The Wireless Haven. It arrives tomorrow and I want be prepared. I also bought the usb.m.2 adapter from The Wireless Haven to get this done. Is there anything else I need?

Here is what I have downloaded and looking to validate this is correct.

• EM12GPAR01A21M4G_01
  QFlash_V4
  Quectel_LTE&5G_Windows_USB_Driver_V2.1

[Didneywhorl]

That is the latest one. 01A21

QFlash 4 should be good. and the drivers look good. Plug in the device before installing the drivers. Sometimes Windows is wierd af about the drivers and quectel modems. I have one Win10 PC that REFUSES to let me finish a modem flash, and another Win10 laptop that has zero issues. Odd and frustrating.

[gutowscr47]

Thanks for the quick feedback. Realized I posted this in the wrong area. After this, need to figure if if I put the modem into MBIM mode from computer (AT Commends) before placing in router and how to do that. Any tips? I know the command is AT+QCFG="usbnet",2 but not sure yet where to execute it from (windows when in m.2 device or after installed in router)

[Didneywhorl]

Either way is fine, really.

If you do it in the router, make sure you power cycle the router, or run the command

Code: Select all

AT+CFUN=1,1

[kz333]

Firmware EM12GPAR01A21M4G_01.004.01.004.zip


QFlash_V4.18