Hi,
I have a RM500Q-AE that is in ECM mode. I am able to log into the webserver using the IP address however all of the menu options on the left navigation are disabled/grayed out. Does anyone know how I can enable the menus? There are options for WWAN Settings, NAT Settings, Firewall Settings, WLAN settings, UPnP DLNA MDNS, Account Configuration.
I am using the modem with an M.2 to USB3 housing that I have connected to a Gl.iNet AR750S router. QMI and MBIM are not able to connect to the internet when I try to update the 3g/4g modem settings, but ECM works.
https://imgur.com/a/flNyYML
RM500Q-AE Webserver menu
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
- Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: RM500Q-AE Webserver menu
Yes, that was the first thing I tried. I also tried with Chrome, Safari, and Edge. Nothing seems to be clickable. I am thinking maybe the manufacture disabled it via a firmware update.Adm1jtg wrote: Thu Aug 26, 2021 3:47 pm Well looing at your image I would ask.... Have you tried downloading and using firefox like it suggests?
- Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: RM500Q-AE Webserver menu
Shoot a message to Quectel, and see what they say. Or post on their forum.