I use putty and enter root and the password and i am in.
1) need to find the at commands i can use
2) do i need to use minicom as my entry? I need the minicom command line, like this minicom -D /dev/ttyUSB2, this example does not seem to work as any at command, like at!entercnd="A710" returns the error message
I did this level of programming 30 years ago, so relearning.
MOFI4500 v3 with a Quectel Ec25-af
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
- Didneywhorl
- Posts: 3646
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1370 times
- Been thanked: 764 times
- Contact:
Re: MOFI4500 v3 with a Quectel Ec25-af
I'm not sure what terminal tools are on the mofi, but you can get the AT commands for the Ec25AF direct from quectel.com or....
https://drive.google.com/file/d/1LDR7Mq ... sp=sharing
I always have better luck using minicom -s and setting the serial port via menu, over running it direct from the cli command
Try picocom too maybe
https://drive.google.com/file/d/1LDR7Mq ... sp=sharing
I always have better luck using minicom -s and setting the serial port via menu, over running it direct from the cli command
Try picocom too maybe
Re: MOFI4500 v3 with a Quectel Ec25-af
I use minicom on mine. Specifically, minicom -s then change the serial port to ttyUSB3. ttyUSB2 would also work, but that interface spits out a lot of lot of information here and there that can interrupt you while you're typing.
AT commands go like:
AT commands go like:
Code: Select all
AT+WHATEVER