EM7565 AT command weirdness

Sierra Wireless AirPrime Modem Card Topics
Forum rules
Use the SEARCH function for related topics PRIOR to posting a new topic on the same subject.
Post Reply
poodad
Posts: 31
Joined: Thu Jul 23, 2020 4:09 pm
Has thanked: 1 time
Been thanked: 20 times

EM7565 AT command weirdness

Post by poodad »

I'm running OpenWRT on a raspberry pi4 with a EM7565 modem attached via a USB enclosure. I find that after powering up, the modem may or may not respond to commands, or may respond partially. Sending an "AT" to the modem does not get an echo, but the modem will reply "OK".

Here's the really odd thing: If I send AT&V, which is supposed to show operating communication settings, the modem will reset (minicom will complain about not being able to open /dev/ttyUSB2) for a few seconds, then reconnect. OpenWRT will show the interface go down and back up.

When it comes up, the modem will give a couple of unsolicited "OK"s, and from that point, will echo what I type, and will always reply fully to "AT!GSTATUS?".

I'm running release 14 (SWI9X50C_01.11.00.00) generic software.
R1250GSA
Posts: 90
Joined: Fri Sep 25, 2020 10:45 am
Location: USA
Has thanked: 18 times
Been thanked: 14 times

Re: EM7565 AT command weirdness

Post by R1250GSA »

Mr. P,
Are you still have these issues?
I can not help, but I am following your bread crumb trail.
gscheb
Posts: 1605
Joined: Tue Sep 10, 2019 10:37 am
Has thanked: 85 times
Been thanked: 329 times

Re: EM7565 AT command weirdness

Post by gscheb »

Post Reply

Return to “Sierra Wireless Modems”