So I got my brand new NEXQ6GO-U in the mail today and set up the EM7565 on Visible. Everything was going swimmingly until I decided to try to play with netmasq config files to block some ad domains. After restarting it's still broadcasting the SSID and allows wifi connections, but it's not assigning IPs and I can't get into the web UI. This was probably just a $70 learning experience, but is there any way to reflash the firmware on this thing using either an SD card or TFTP? I've already tried rebooting while pushing the rest button, which seems to put it into some kind of holding pattern for about 5 minutes so I'm assuming it's waiting for TFTP. I found some instructions for flashing other Atheros devices via TFTP and found the google drive with the WiFiX firmware, though there is nothing in the drive for the NEXQ6GO-U.
Any help is appreciated, I'm going to take my lumps and order another device but I'd like to at least get this one working as a backup. Thanks!
How to reset/flash NEXQ6GO-U
Forum rules
Please assure there is not an existing forum and topic related to your post
Please assure there is not an existing forum and topic related to your post
-
Didneywhorl
- Posts: 3635
- Joined: Fri Mar 23, 2018 5:37 pm
- Location: USA
- Has thanked: 1369 times
- Been thanked: 761 times
- Contact:
