Wireless Joint

Thanks for the tip, but I already had a couple of the The Wireless Haven 1700-2700MHz WiFi 4G LTE 15dBi Directional MIMO Antennas and wanted the maximum gain possible for the 600MHz band n71. With my location from the tower, I need all the gain I can achieve. I have a 30-foot antenna mast using 20ft ...

I purchased an 11 dBi Yagi Antenna for TV White Space (470-862 MHz). I'm still testing the configuration, but it made a significant difference in the dB gain. Had to send the first one back because of the poor packaging, but it's a high-quality antenna. I'll post my results in a couple of weeks ...

This was posted a little over an hour ago.
Starlink is available to a limited number of users per coverage area at this time. Orders will be fulfilled on a first-come, first-served basis.
https://www.starlink.com/

Is there a recorded video link to the 5G teardown?

I've been using a WE826-T2 with Nomad's Wholesale Pink plan (T-Mobile). With external antennas, I have a decent D/L of 20Mbps and u/L of 5Mbps. I received my T-Mobile Home Internet yesterday and without external antennas, I have one signal bar at my location. with a D/L speed of 2-4Mbps and a u/L of ...

I'm using an EP06-A modem in a WE826 router with external antennas on the T-Mobile network. I have one tower in my location and currently connecting on Band 4 and Band 12 using CA. Would upgrading to the Quectel EM20-G and adding two more external antennas improve my bandwidth?

I just recently built a WE826-T2 using GoldenOrb 2020-03-01 with a Quectel EP06-A modem. When I checked the network interfaces the WAN1 IPV4 IP address it shows 6.36.182.109/30 . Doing a search on the IP location it revealed Fort Huachuca Headquarters USAISC (United States Army Intelligence and ...

They MoFi has poor WiFi performance, so don't rely on it for speed testing. Use a LAN connection, LTE signals will vary along with congestion resulting in speed test differences.

When setting up and external antenna the I find the 10-second signal refresh rate way to slow for alignment.
Is there a way to change the Signal Information Refresh Rate to something faster than 10 seconds, say 3 seconds?

I know this is an old topic, but I think I know what internal ID they are using. I have three MoFi's, one being a MOFI4500 4GXELTE V1 and two MOFI4500 4GXELTE V2's. The V1 version is about four years old and the V2's are a couple of years apart. I discovered the first three MAC hex numbers (78:A3:51 ...