Wireless Joint

hi all -

I am using the 1608 as backup and installed the MC7455 (Sierra Wireless). Using modem manager I see the modem but once added - Error: Modem bearer teardown in progress is displayed.

Is there another way or method to get the modem to work? Thanks!

Good afternoon - Wondering if there is a way to improve cell quality either with current setup or antenna. I have a pair of antennas purchased off of The Wireless Haven. Connected to CBA850. Current Provider is T-Mobile. With the CBA850 is it possible to upgrade to CAT18 to take advantage of Band71 ...

@ GSCHEB - I have T-Mobile as well - what is your setup - which bands are you using?

Hi everyone - So I am trying to future proof myself and am currently running a CBA850/T-Mobile. Of course when looking at the 5G coverage map they say 5G is available in my area but how much marketing is there to believe :D . I have bands (according to cellmapper.net) 2, 4, 12, 25, 66, 71 in my area ...

Thanks Jim - Going to move from attic to outside mount. I have ordered the J-Pole and plan on doing the following: https://wirelessjoint.com/viewtopic.php?f=21&t=350 First, if going on a second story and need to ground - what is the best option and how to achieve? Second, to get the enclosure to ...

Haven't really thought about it - I guess I could - below is a pic of where I would probably put the antennas. Any idea of setup, what mast would you recommend? From Cable to Cradlepoint, does anything need to be in place? I will more than likely run cable from antenna to cradlepoint, with CP being ...

Yes the antennas are in the attic.

Also - on the CBA850 - T-Mobile - I never see carrier aggregation become active - just states Inactive. I have done speed tests/youtube videos but nothing ... anything I need to do?

Side note as far as bandwith tests - using speedtest.net unless you guys have any other recommendations.

Also noticed that the AT!GSTATUS? was cut off - here is a better screenshot.

Again I cant say enough Thank you for you for your time. As you can see below - I have once again bounced to the tower closest to my house .. Band 12. On Band 12, download speeds increased to 18-22Mbps / 5.26MB (for reference on Band4 speeds would be half of that). Notice on Band 12/2 the the AT ...

Some more information is regards to what I am seeing .. any pointers would be appreciated such as band locking and trying to get closer to the tower near house.

Forgot about the spreadsheet - my bad … think I removed my previous commands.... Putty: atterm ATI AT!ENTERCND="A710" AT!BAND=12,"",0,0 With this it should had removed my previous commands entered correct? Also removed from AT Config Script. Did not do reboot or at!reset at this point.

Thanks again for the information....my questions are in bold below.... I found some pigtails that I had, used those and the RSRP did not change - so I assume the LMR cables are good to go? During bandwidth testing, noticed my download speeds where slower than upload, is this a sign of congestion ...

Thanks for the info - Terrain is flat - just trees. I will do some tuning with the antennas. Dumb question, one of the LMR cables was outside (previous setup) and I did not seal the cable. Do you see any issues? I heard if these get wet internally they are done for.

Thank you Jim -

See below:

Good day - Thanks for the recommendation of the CB850. Moving to this from MoFi is night and day. I do have some questions in regards to tweaking. I followed the tutorial on the CB850 and set DHCP options. The router itself is connected to two antennas (https://thewirelesshaven.com/shop/antennas/4g ...

Thanks to all ... I appreciate the help.

Thanks to all for replies … so I have a Mofi4500 4GxeLTE V2 Router but am having troubles with SIM clicking - hence the reason I am not using and was looking at other alternatives. The Sierra card in there now is a MC7455. What case do you think I would need to get up and running? If it helps, I am l ...

Thank you for your responses. So I tried different cables - and as you can see from the screenshot it made a difference. Now the question is - is my ISP throttling me? Speed Test - https://speedof.me/show.php?img=191122023029-6208.png Also - if the Netgear could be the issue - I am plugged directly ...

ok - came home and did some tests unplugging the ts-9 cable - honestly bars did not change. Even before unplugging the bars would jump between 2/3 bars. Unplugging / Plugging did not make a difference. I would say tower is roughly 4-6 miles away. I am using Open Signal to determine where my tower ...

Thank you - I am not against buying cables if so what would you recommend - links if possible.

Thank you for the quick reply - to answer - I am using the following - https://www.amazon.com/gp/product/B077WKBRBK/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 The above cables plug into the LB1120 https://www.netgear.com/home/products/mobile-broadband/lte-modems/LB1120.aspx (running bridge ...

Good evening - I am at wits end. So I I am using an LB1120 and a pair of https://thewirelesshaven.com/shop/antennas/4g-lte-antennas/directional-panel/700-2700mhz-15dbi-4g-lte-directional-antenna/ (see pic showing mount and X pattern for polarization . Honestly - I am not getting any increase in ...

Hello everyone - So I have a LB1120 and live about 7 miles from tower. The LB1120 with window open will pick up 2 bars. I am interested in and a MIMO antenna setup but these have been out for sometime and need to determine what antennas I could get. https://thewirelesshaven.com/shop/antennas/700 ...