Wireless Joint

I tried a ktec 2.5 amp adapter from my office business class frontier modem with the same results.

It comes with a supposedly upgraded 2000mA ac/dc adapter from when I bought it from thewirelesshaven.com. I don't know that I have one that is any more powerful.

Just for current information:

Current signal info as it sits on my desk.

Network : LTE
CSQ : 20
Signal Strength : 64%
RSSI : -73 dBm
ECIO : -15.9 (RSRQ) dB
RSCP : -107 (RSRP) dBm

Connection Monitoring Status : Disabled

Cell Information
MCC MNC : 311 480
RNC/eNB ID : 300E8 (196840)
LAC/TAC ...

The router is already on channel 11. I used the M2 since it is all I have at the moment, but I plan on getting an actual access point if I can't get this figured out.

Also it is not always Verizon band 4, currently connected to band 13 and it is the same when I attach the antennas.

After more experimentation I have figured some things out.

I found a ubiquiti nano m2 and used it as an access point. Speeds are the same as plugged into LAN ports.

I was messing around with the router and found that when I took off both 2.4G antennas the speeds went from under 1 mbps most of the ...

I have discovered that the wireless output of the router is usually significantly less than the LAN ports. I took the unit up to the building where I want to use it and with the right placement the wired connection would consistently be around 25 mbps download. Wireless internet would anywhere from ...

Without anything else to try I am thinking about adding better antenna's than provided with the router. Any recommendations on which ones to try? The Cisco antennas that are listed as an upgrade only have 2db gain. Is that correct? Is there a better set up to try?

Went to work and started over and followed the above tutorial. Stayed in QMI mode, tried to switch to MBIM before and it stopped everything from working. Verizon mifi download was 30. WE826 is around 4 to 5 mbps. Sitting in the same spot. Below is the status.

AT!GSTATUS?
!GSTATUS:
Current Time ...

I have been working in this at home and followed the tutorial. Things seem to be working, but my signal is much worse at home so I will have to try it again when I go back in next week. Mifi is about 8 mbps down at my house and the lan port was the same when I was connected. The wireless test half ...

I just bought a WE826 T-2 and a Sierra MC7455 to use with an unlimited Verizon data plan (government issued) and the speeds are much slower than the factory supplied mifi. On the 8800L Mifi I can get speeds around 30 to 40 down and the WE826 is at 10 down. This is sitting in the same spot.

I ...