Wireless Joint

Can you send me or post any links to the fan you used and the faraday tape. Thanks in advance.

I just purchased this from wireless haven and have 3 questions. 1. When connecting the antennas does it matter what side I put the split lock and and the Lock washer. I assume the lock is on the outside and the split lock washer on the inside? 2. There was a grey rectangular rubber piece in the ...

What enclosure would you recommend for a ws1208v2?

I m running a em20 in a ws1208v2. I get an error on AT+QTEMP command? Also get an error with AT +QGPSLOC

Any suggestions on how to resolve.

The module reports the temp correctly in a zbt wg1i608 no problems.

Will the firmware for ws1208v1 work on ws1208vs or would I need to make some changes?

I followed the directions for the splash screen but it is just about perfect. The issue is that the CSQ, RSRQ and SINR values are in small black font not large colored font like the original example. Do I need to edit the splash.html file or something else to get it to look correct. Everything else ...

I am using a EM20 in a WG1608. I runs great with 5x CA and download speeds on 120-150. The temp varies between 50-55C. I have a computer connected via Lan port and this works fine when I download and stress the modem with downloads etc. As soon as I turn on NordVPN (open VPN protocol) on the ...

I have an em20 in a wg1608 but I get disconnects even with the larger power supply. It looks as if the modem get up to 69 C and then resets? Not sure if this is solely a heat issue or if it’s a router issue? What would be a stable router with 4 antenna connection to use. Wifi connection would be h ...

ok Had to move it to c: and out of user folder to work. After I use qflash v5.1.... I get a "PASS". The modem has issues being recognized at dev/ttyUSB2. Can't open sometimes.. Is this from a bad firmware upload? Suggestions?...Not sure what is occurring? EM160R-GL with version "09" in a WG1608v4

I am still in need of some help with my WG1608v4 and EM160R-GL. I am running "09" firmware witht he latest Rooter version GOWG1608-2022-03-23. I am using a 4A power supply. I am still getting Can't open /dev/ttyUSB2 AT command errors and disconnection/removal of the modem and then tries to reconnect ...

Well I am not a pc guy but I choose rename QFlash_V51 to Qflash and I still get the same error ...what I I doing wrong. I do not see a "space" in the name" ?

Sorry for the noob question, but how do I ping a webpade instead... do I enter a url instead if ip address...

https://duckduckgo.com instead of 8.8.8.8??

A

Didneywhorl:

What is the latest beta firmware for GO that there is for the wg1608. I have a v1 and am using 2021-11-25?

I am working with the WG1608v2 and EM160. I am using it as a backup system so it does not get stressed very much. I can get 4CA (Bands, 2, 14, 30,66). I get speeds of >100 most of the time. I have set reboot to every day at 1 am. I am using GoldenOrg 21.02 - GO 2021-11-25 Firmware: Quectel. EM160R ...

Hey so just reporting back. First off found out a few things regarding the MTU I reported on earlier, the Sierra modems lock down the MTU of the hardware to 1430 so you will in fact have issues if you specify an MTU over 1430 - meaning you should populate 1430 all the way down the line from your ...

maathhuran:

Can you send me a copy of the RM500Q command manual. I cannot locate it on quectel's website.
Thanks in advance

Eist1:

Did you ever get the modem menu back up and running?

Did the implement AT+QRSRP on the EM160?

BillA:
Is there a new version of goldenorb coming for the WG1608. I am using 6-10 version as 6-14 had some issues. I thought I read somewhere where a new verison is about to be released? Do not see it however..

Anybody willing to post new images of the Chinese screens to upload goldenorb from recovery mode on zbt router

jmmec:

Newbie question...whats the best method in using the MHF4 insertion tool ....

Do I load the connector on the tool and then bring to the modem connection or is there a better way to insure that I do not damage the connetor on the modem board?

I looked at this but it would require opening up the case to get into the connections to attach four external directional antennas correct?

Is there any advantages or disadvantages to setting up IPV6 on my router. I am using ATT plan and have a MOFI4500. Just wanted to check before I implement it in my network

Is there any equivalent Cat 18 , 4 CA device for ATT? Or a sierra wireless card that does the same thing?

The antennas are facing the tower. The house is three stories tall and behind the antennas. So the antennas are between the house and the tower. See diagram. Not to scale by the way.

Default
ttyUSB0
ttyUSB1
ttyUSB2
ttyUSB3

I tried them all same response?

I had the outside antennas up about 20 feet off the ground. (I used a balcony and the mounting pole that I have to place them just outside the window and within one foot of the height, where the inside omni antennas are located. Now remember the LMR400 cable was 18 feet in length so that would ...

blames: Yes I know where the tower is located. I turned the direction about every 15 degrees in a 180 degree (90 degrees each way from what I think is ideal) turn just to make sure that things were not way off. The main location I had them pointed should have been within 15 degrees of ideal. The ...

Swwiffy: I need to figure out how to run AT commands on the MOFI. WhenI do then I can get you the LTEinfo you request. What should it look like? It may ne in another location for the MOFI4500? Yes the the Directional antennas were outside and the OMNIs were inside. That alone would help the signal ...

Here is a screenshot

Ok Figured out how to get the modem info: Readings with paddle Omni antennas (Blade Antenna with system) indoors behind a window 0:[AT!GSTATUS?] 1:[!GSTATUS:] 2:[Current Time: 98 Temperature: 26] 3:[Reset Counter: 1 Mode: ONLINE] 4:[System mode: LTE PS state: Attached] 5:[LTE band: B2 LTE bw: 20 MHz ...

Jim: Do you know how to do that on a MOFI 4500. I emailed support but do not have a response yet?
This is all I can get so far.

tried that also. Same response "bad address specified?

How do I send a command on the mofi4500 to view signal data.

I tried !gstatus? In the at command diagnostic sections and it returns ‘bad address”

Sorry for not ncluding all the details. I have two mofi 4500 for dual wan redundance. The center antenna is split to go to each mofi. I use a splitter from prefix. I pointed the antennas in the direction of the tower. It is 4.5 miles away. The Omni antennas are located snide the house and shielded ...

I am not getting any increase in signal strength with my new antenna system compared to stock paddle antennas for my MOFI 4500. I am using three 700-2700 Directional Antennas positioned as The Wireless Haven suggests. They are connected to the MOFI with LMR400 cables (18 feet). I am using N-type ...

Wireless Joint

Search found 38 matches

Re: Usb3 to m2 enclosure assembly

Re: FYI the external M.2 to USB modem adapter needs the lid off due to internal interference

Usb3 to m2 enclosure assembly

Recommended USB Enclosure for ws1208v2

Ws1208v2 and EM 20. AT+QTEMP error

Re: Splash screen edit

WS1208v1 versus ws1208v2

Splash screen edit

VPN causing overhesting

Em20 best router

Re: Quectel Modem Flash Tool V5.1

Re: WG1608 V4 + EM160R-GL not connecting to internet

Re: Quectel Modem Flash Tool V5.1

Re: WG1608 V4 + EM160R-GL not connecting to internet

Re: WG1608 (v1) + EM160R GO firmware issues

Re: WG1608 V4 + EM160R-GL not connecting to internet

Re: [SOLVED!] Losing constant Internet connection on Mofi 4500 (and my mind)

Re: Help getting RM500-GL Connected

Re: New ZBT WG1608 5G-ready router + GoldenOrb firmware

Re: EM20 Antenna Connection and commands?

Re: New ZBT 5G-ready router WG1608 + GoldenOrb firmware

Re: WE | WG Recovery Mode Chinese Language

Re: EM 7565 with M2M NEXG H721 Router no connection

Re: Verizon 8800I

IPV6

Verizon 8800I

Re: Problems with signal

Re: Mofi 4500 command for signal information

Re: Problems with signal

Re: Problems with signal

Re: Problems with signal

Re: Mofi 4500 command for signal information

Re: Problems with signal

Re: Problems with signal

Re: Mofi 4500 command for signal information

Mofi 4500 command for signal information

Re: Problems with signal

Problems with signal