Wireless Joint

I received a 4x4 MIMO antenna today and did some testing and was able to connect to Band n71 on 5G cellular. I was also able to connect on to Band n71 on my single Long Ranger Antenna (Non-MIMO) Only changes I made was to put the modem in Auto mode and enable all bands. Then I removed the bands the ...

I am a noob to 5G. When I set the modem to either of these commands isnt it supposed to only enable NR5G (NA) not (SA)? AT+QNWPREFCFG= "mode_pref",NR5G AT+QNWPREFCFG= "mode_pref",LTE:NR5G This is the other command that I can run but it disables both (NA/SA) modes. AT+QNWPREFCFG="nr5g_disable_mode",1 ...

Here is the diag output: AT+QNWPREFCFG="mode_pref" +QNWPREFCFG: "mode_pref",LTE:NR5G AT+QENG="servingcell" +QENG: "servingcell","NOCONN","NR5G-SA","FDD", 310,260,8371C002,310,7C1B00,126290,71,3,-102,-11,17,1919 OK AT+QRSRP +QRSRP: -100,-134,-44,-44,NR5G OK From the shell prompt: /usr/lib/rooter ...

A user in Quectel forums made a post suggested to try R11A02 image. I downloaded and tested the R11A02 image and I can now see Band n71 again and even ping 8.8.8.8 but I cannot run a speed test or connect to the Internet. Ping statistics for 8.8.8.8: Packets: Sent = 4429, Received = 2891, Lost ...

Just to prove that I am not crazy and get a 5G signal,
I plugged in my Calyx M2000 MIFI and it is showing it is connected to Band n71 /5G without an external antenna.

I dont know if the RM502Q-AE supports 5G yet?????

More diagnostics data to share: AT+COPS=? +COPS: (2,"T-Mobile","T-Mobile","311490",7),(1,"Sprint","Sprint","310120",7),(1,"312 250","312 250","312250",7),(1,"AT&T","AT&T","310410",7),(1,"313 100","313 100","313100",7),(1,"311 882","311 882","311882",7),(1,"Verizon","Verizon","311480",7),(1,"312 530 ...

according to the output of "AT+QSCAN=3" there are no 5G bands it is seeing.
I know for a fact that I have Band n71 that is available to me.

Is the Quectel RM502Q-AE not working with Rooter firmware to see 5G yet?

According to WirelessHaven team the Rooter scan for 5G is still being worked on so not 100% accurate. They suggested I run this command: AT+QSCAN=3 +QSCAN: "LTE",311,480,5230,16,-105,-13,23,116 +QSCAN: "LTE",310,410,5780,238,-109,-10,11,19 +QSCAN: "LTE",313,100,5780,238,-109,-10,11,19 +QSCAN: "LTE ...

Ok, I figured out what I was doing wrong. I had the SIM plugged into the NESX2GO router and overlooked the SIM slot on the USB enclosure. I moved the SIM to the enclosure and I am getting connected now but only to 4G/LTE not 5G Bands. I want to preface this next section with I tested my setup (Dual ...

thanks for responding to try and help! I have a "Quectel RM502Q-AE 5G NR" 5G/LTE Modem Module with Adapter Enclosure from TheWirelessHaven.com. This is paired to the NESX2GO 5G/LTE Router with WIFIX firmware. My Goal: I have a separate NESX2GO bundled with the internal 4G/LTE Sierra Wireless and it ...

Just wanted to share the link for the (R11 & R13) version firmwares for the RM502Q-AE modem.
This is direct form Quectel forums.

https://forums.quectel.com/t/firmware-f ... /27?page=2

I tried this command per Quectel support. AT&F0 I also tried to upload the firmware to run the update and reinstall RM502QAEAAR13A02M4G (R13 version) but it says it is out of space so cant finish copying it up. I have no idea what files I could delete from the modem when SSH into it. QFirehose -f ...

Thanks, is there a command I can run to reset the modem firmware?

Quick Update: I ran the following commands but they dont reset the modem to autodetect the SIM card and still have the same IMEI. AT+QPRTPARA=3 --reset modem to its OEM state / factory reset setting AT+QPRTPARA=1 --so settings will save properly to NVRAM after the next power cycle AT+CFUN=1,1 ...

I have a "Quectel RM502Q-AE 5G NR" 5G/LTE Modem Module with Adapter Enclosure from TheWirelessHaven.com. This is paired to the NESX2GO 5G/LTE Router with WIFIX, Golden Orb Rooter firmware version (GoldenOrb_2022-04-19). My issue is that the Modem came programmed with a T-Mobile SIM card modem ...