Wireless Joint

Hm, odd, as it defaults to ipv4v6 if you select fast as the apn in the wizard after a factory reset. As long as the current settings work I'm happy, I suppose.

So the majority of internet traffic uses ipv4, good to know. Are there any issues I should watch for when not using ipv6? I don't have any ...

Okay, it was ipv4v6 on the Franklin but ipv4 is what works on the mofi. I still don't understand this black magic field.

Sorry for wasting your time. Thanks again!

Hm, well, when I ran the wizard to set the wifi password it took me off. I think it may have changed apn. Damnit.

Should I be using ipv4v6 or ipv4 only for calyx?

I'm back on the network with the 7960 in the 5500!!! Thanks so much!!!!! Turns out it recognized it in either slot and I'm just slow.

Still no word from Canada.... 'll be taking my business to wireless Haven in the future.

Have a nice evening!

No MOFI despising here. Some people have just had a bad experience with their support and in 'some' cases lack of.

I think the right most modem slot, looking from the ethernet ports side facing you, is the first modem slot. That is how mine is. I don't believe there is a mode switch on the 5500 ...

If it shows up at all, the adapter is working. It can only be communicated with via Putty using a Serial COM port, not via IP address. You can find the correct COM port via the device manager. click on Modems where the 7690 should be and right click on it. Then click properties. then click on the ...

I quit being a wuss and went for it. Success on sending commands! Thank you!!!

Hey. Sorry for the late reply; busy Friday/Saturday. Thanks for the help so far already!

Got my windows 10 desktop set back up. I have successfully installed the drivers and the modem is displaying properly (COM8).

In Putty I change SSH to serial and enter COM8. I set local echo and line editing ...

[Mod Edit: Split off from another topic and placed here as it's own topic. Easier for people to find this information.]


I missed this completely but, if you are using the modem directly inside the WG1608 router then the modem wont put itself into USB mode. It's stock mode is PCI, and all of these ...