Wireless Joint

Yeah, I got the 5500-EM7690 and have been on my own as far as support goes despite /u/mofi on reddit. I have taken much into my own hands and even gone through compiling my own software to flash the modem since their Linux arch is MIPSEL..maybe MIPS. I got the 5500 not long ago. I am a software geek ...

Ah, someone on the inside! That was one of my thoughts. Maybe someone here can get me a code. I'll post the info when I get a chance.

Thanks for the reply Rich. I am assuming I will need a tool to open the firmware file to be able to look at the XML as the 2 files I have are cwe and nvu. I'll do some digging. Yeah, the FDT method has crossed my mind but I would like to avoid taking the modem out of the router if possible. That is ...

So, I have an ALCATEL linkzone 2 that can apparently be carrier unlocked. It is currently locked to Tmob. I thought it would be an easy find. If you put a non Tmob SIM in it and log into the UI, it askes for an unlock code. Searching high and low only leads to websites offering to send the code if ...

So, a while back I reset the EM7690 modem in my MOFI 5500 to defaults and it lost it's firmware image. I started poking around and for some reason, MOFI no longer has the modem flasher option in the UI. It was there on the 4500 from what I have seen. So, I found that the 5500 runs on a Linux under ...

Sorry for the delay. I was able to get the firmware flash tool running natively on the MOFI 5500. I had to use an emulator to run Debian on MIPSEL arch and was able to compile my own version that worked on MIPSEL which is what the router runs on. It makes some progress but fails with the following ...

Thanks. I gave it a shot using AT!OPENLOCK="DA6BA3E330F0F07579B9F484B6186E2251CE3FA8C5B4D0304DB727F78E8A178B9" and had no luck. I then factory reset the modem via AT!RMARESET=1. I rebooted my MOFI and now, unfortunately, it keeps getting "Carrier registration failed". I have confirmed my APN ...

Hi all, I am working toward repairing the IMEI on my MOFI 5500 and am looking for some help getting the encryption key. From everything I have seen, it looks like the response to AT!OPENLOCK? is normally a 16 character hex code but I get a huge one. AT!OPENLOCK? 0001,!OPENLOCK ...