Wireless Joint

I contacted Cudy Support and they mentionned that they will release a new firmware update with the option to manually select the APN! That's great news!

Hello,

I have the cudy lt18 and I’m loving it! I’m manually selecting my operator by running the command:

AT+COPS=1,0,"MY SELECTED OPERATOR",7

by accessing the web interface of the router at /cgi-bin/luci/admin/network/gcom/atcmd

The selection works well and it also persists after a reboot, but ...

Hello all!

Is there a way to select the network operator? If I do a cell lock, will that force my device to switch network operator? I'm on Voxel firmware. Thank You!

Is there a way to select the network operator? If I do a cell lock will that force my device to switch network operator?

I would be curious to see what running a speed test with something hooked up to the external ports gives you, are you still only pulling on 2, or does all 4 kick in.


From my testing, with the external antennas hooked up to the factory spots you can only get 2x2.

I currently have 4 external ...

It will not enable 4x4 unless under demand, and even then if you are on a low freq band (B71, 5, 12, 13, 14, 17, 26, 29) it will not operate in 4x4.



Thanks for the precision, this saved me lots of troubleshooting time! I moved the LBR20 to my cottage house and can now only connect to band 13 ...

If any one is interested, I recorded myself going through the 4 antenna mod. Now Ironically I stepped back a little because the cheapo antennas were not better than what came from the factory (shocking, I know). But I think it would be well paired with some quality antennas.


Thanks for the ...