Forgot to mention ...
Decided to do some thru-put testing. In this configuration speedtest.com
freezes the netgear M5!!! No front-panel, no pings, even the app can't see it.
Tried different cables, no luck. Repeated the experiment 3-4 times, always the same:
tethered Beryl, speedtest hangs.
direct ...
Search found 3 matches
- Fri Apr 15, 2022 9:56 am
- Forum: GL.iNet
- Topic: Beryl routing.
- Replies: 4
- Views: 5319
- Fri Apr 15, 2022 9:48 am
- Forum: GL.iNet
- Topic: Beryl routing.
- Replies: 4
- Views: 5319
Re: Beryl routing.
Yes.
The Beryl WAN port is cabled to the UDM WAN port
The Beryl is tethered to the netgear @ 192.168.1.4
The Beryl is setup @ 192.168.8.1
The UDM WAN router is set to 192.168.8.1 and its address is set to 192.168.8.2
All internet functions work as expected.
The Beryl WAN port is cabled to the UDM WAN port
The Beryl is tethered to the netgear @ 192.168.1.4
The Beryl is setup @ 192.168.8.1
The UDM WAN router is set to 192.168.8.1 and its address is set to 192.168.8.2
All internet functions work as expected.
- Wed Apr 13, 2022 2:22 pm
- Forum: GL.iNet
- Topic: Beryl routing.
- Replies: 4
- Views: 5319
Beryl routing.
Hi all,
First, new here so if I make any faux pas don't hesitate to tell me...
I am setting up the following system:
netgear M5 192.168.1.0 <USB tether> 192.168.8.4 beryl 192.168.8.1 <ether cable> 192.168.8.2 Unifi DreamMachine 10.11.12.2 <ether cables...>
I have a Pi3 connected via ether to the ...
First, new here so if I make any faux pas don't hesitate to tell me...
I am setting up the following system:
netgear M5 192.168.1.0 <USB tether> 192.168.8.4 beryl 192.168.8.1 <ether cable> 192.168.8.2 Unifi DreamMachine 10.11.12.2 <ether cables...>
I have a Pi3 connected via ether to the ...