Wireless Joint

There are directions in the quick start guide to do a VPN. I also believe you can set it up via the GUI. I have not played with this yet.

Uh yeah that's super weird. I hope someone else can chime in, because mine does not do that.

It does not. What's getting reset?

Yeah you can you flash the stock firmware. Keep in mind that isn't going to delete you TTL files, or any other scripts that you put in there. you may try to go backwards through the steps and delete things.

initially i was able to access ssh/telnet and to change the ttl and cell locking. i wanna tweak some of the settings but now i cant get access. i did check the enable telnet in the debug screen and still no go. "ssh: connect to host 192.168.1.1 port 22: Connection refused" is the msg i get on ...

Have you bricked your device? Did a firmware fail to upload and you had no choice to yank the plug? Is the light just sitting there blinking mocking you, EFF YOU, EFF YOU.

I did.

This saved my bacon.
https://kb.netgear.com/000059634/How-do-I-upload-firmware-to-my-NETGEAR-router-using-TFTP-from ...

I'm not 100% sure it does disable them, but in general I believe it uses a cancellation circuit when an antenna completes the positive to negative circuit on the antenna port. If you look at the pcb you can see the jumpers on the pcb traces. I don't fully understand it but it's my best guess ...

If any one is interested, I recorded myself going through the 4 antenna mod. Now Ironically I stepped back a little because the cheapo antennas were not better than what came from the factory (shocking, I know). But I think it would be well paired with some quality antennas.


Thanks for the ...

If any one is interested, I recorded myself going through the 4 antenna mod. Now Ironically I stepped back a little because the cheapo antennas were not better than what came from the factory (shocking, I know). But I think it would be well paired with some quality antennas.

https://www.youtube ...

Did anyone save the default bands for the Quectel EG18 modem? I had messed with some band locking long ago and want to get everything back to factory. I came across echo -ne "AT+QCFG=\"band\",0,42000001003300385a\r\n" | microcom -X -t 1000 /dev/ttyUSB2 but want to be sure that's the right one ...

Looking through the original post and using that spreadsheet, i'm getting

AT+QCFG="band",0,z420000000000000000


putting it in the command listed, is this what you're looking for?
echo -ne "AT+QCFG=\"band\",0,z420000000000000000\r\n" | microcom -X -t 1000 /dev/ttyUSB2

I have not ran any of ...

If you are more of a visual learner, a fellow LBR20 user has created a very nice overview video covering most of what is included in this guide (I would still recommend reading through this guide in its entirety for completeness and understanding):
https://youtu.be/Mnmby6HLViA




Updated with ...

I was having problems with the T mobile home internet and only trying to run the ipv4, It would never connect. I had to switch it to ipv4v6 before things started coming up and working properly. No clue why, people said it should have worked. Maybe if you have ipv6 tables in voxel and not running ...

You explained your questions well, hopefully my answers are clear and satisfactory :)


not only was it clear and satisfactory, that got all my ducks in a row!!

Thanks again for all that you do/did. And sorry for all the questions, I'm just trying to write something up at a much lower level ...

Well I seemed to answer a couple of my own questions while in a training about asset management, it was riveting!! :lol:



@hazarjast

1. bloatware (Armor/Circle/ReadyCLOUD/AWS IoT) ~ there are the scripts to run to shut them down, does this need to happen at every boot?

This would make zero ...

What an amazing thing to wake up to this morning, that OP!!! It's like someone was ready my mind and saw all the chicken scratch notes I had been writing to myself through 300someodd posts!

hazarjast

I read, reread, and reread again the OP, and I did end up with a couple questions. I'm sure it's ...