Wireless Joint

My 6150s I can get into on 12.01.47 via sierrakeygen just haxe to us the 65 modem type vs 55

Not sure on the 6500s specifically though

well i found what i was looking for - but i sitll want to know about the firmware.
you can turn off 5g on these using DX - works immideately - set to 0 to turn it back on

dx -c wwan.5gDisableMode 1

Is there a version of the mr6150 firmware out that bandlocking actually works? (i dont mind using the fdt process to load it if need be )

The normal telnet process to create band lock slots works fine on mr1100, mr5100. mr5200, mr6400 (with extra reboots and some weirdness about preventing a ...

this is what I have working on mine right now until i can sort out some of the other things suggested in this thread. I have this run on startup every time. I did have iptables blocks as well but given the IPs could change and i wasn't comfortable blocking all outbound 80/443 in aggerate if fell ...

Both of mine are unlocked. one via ATT the other i had to use bigunlocker

When the sim was put it and the unlock code entered, each one auto identified the network as the proper carrier (Sprint on one, T-Mobile on the other) It populated a ton of APNs related to the appropriate carrier. One got a ...

this is interesting... i would never have though those would be baked into the APNs like that. The last devices i messed with where franklin t9s and FOTA was just a service that runs that you could disable but you could also change the URL or simply block the DNS query for it.

ill need to look ...

Is there a known way on the MR5100 to prevent the firmware from updating?. There seems to be allot more info about the M1s vs the M5s on this stuff.

I read a few places that the M1s don't do a full firmware load when they update - not sure if the M5s are the same or not. I am running 2 of these in ...

it seems it uses services vs the normal /etc/rcX.d symlinks. I was able call my script from /etc/init/early_init.sh and time it to run when i needed it to

I have been successful with other devices get useful scripts to run on boot of the devices by either sym links in the rcX.d folders, cron or other similar methods.
I cannot seem to find a method that works on these.

has anyone done this?

nm apparently i just needed to reboot it a second time

I have been trying to enable root telnet on an mr5100.

These are the commands I have been trying. They are all accepted but telnet on port 23 still does not work regardless if i test it over USB or ethernet


AT!OPENLOCK?
AT!OPENLOCK="code from py script"
AT!SETCND="mypw"
AT!TELEN=1 - enable ...

that is what i ended up doing but i want to setup a few of these and want avoid the $30 a pop to unlock them is all. Im going to change to clone the IMEI on the next one and see if I can unlock it with the same code then set the IMEI to what want .

Is there a process to carrier unlock a mr5100? I have one that is carrier locked. I was able to repair the IMEI without issue but its still carrier locked. All I have found looking around is doing it via ATT (which didn't work for me - this was an ebay item) or via one of the paid unlock services.