Search found 5 matches

by SetecAstro
Wed Nov 30, 2022 10:20 am
Forum: Quectel Modems
Topic: Help needed in repairing our broken RM502Q-AE
Replies: 8
Views: 7069

Re: Help needed in repairing our broken RM502Q-AE

I just dealt with the "SIM Missing" issue on my WG3526/ NEXP1GO with RM502.

The cause was the SIM enclosure pins not making full contact with the SIM card. My error was CME Error: 13. My solution was to change the modem adapter (PCIe to M.2) to one that has nano SIM slots. You can pick one up in ...
by SetecAstro
Fri Nov 25, 2022 8:30 am
Forum: Quectel Modems
Topic: Quectel RM502Q Band Locking Issue
Replies: 6
Views: 5040

Re: Quectel RM502Q Band Locking Issue

My experience with setting and un-setting the band locking through the GUI is losing control over the NR5G list. The GUI will allow you to Band Lock both the NSA-5GNR and 5GNR Bands but will only allow you to unlock the NSA-5GNR list.

In order to unlock the 5GNR bands, you will need to run the AT ...
by SetecAstro
Thu May 12, 2022 7:09 am
Forum: WiFiX Routers
Topic: NEXP1GO 5GHz Radio Issues
Replies: 2
Views: 3117

Re: NEXP1GO 5GHz Radio Issues


Hmmm. So flashing a different firmware brought it back and then it left again?

Did you flash the firmware like 3+times in a row to ensure some goofy setting isnt stuck in there causing trouble?

Also, you may want to try and set the radio settings to a top or bottom channel, not auto, that isn't ...
by SetecAstro
Tue May 10, 2022 7:42 am
Forum: WiFiX Routers
Topic: NEXP1GO 5GHz Radio Issues
Replies: 2
Views: 3117

NEXP1GO 5GHz Radio Issues

I can't see the 'WiFiX 5G' BSSID on any of my devices anymore.
In the /Network/Wireless/ menu of the router, the 5 GHz radio shows 'Device is not active'. The radio1 icon is greyed out, while the radio0 icon (2.4 GHz) is blue and working.

Here's what I have tried:
1. Clicked on 'Restart' next to ...
by SetecAstro
Tue Apr 05, 2022 4:46 am
Forum: General and Unclassified
Topic: WG3526 Wifix RM502Q-AE w/Verizon
Replies: 6
Views: 2957

Re: WG3526 Wifix RM502Q-AE w/Verizon


I appreciate the help Didneywhorl. I'll open her up to make sure none of the antennas disconnected and will try improve reception.


Did you get your signal issues resolved?

The Quectel modem antennas need to be connected as such:

ANT1, ANT2: 2x2 MIMO pair for Low-Band and Mid-Band
ANT0, ANT3 ...

Go to advanced search